Private Room

Semi-Private Room

Intensive Care Unit

Automated urinalysis test [CPT 81003]

A urinalysis is performed by dip stick or tablet reagent for bilirubin, glucose, hemoglobin, ketones, leukocytes, nitrite, pH, protein, specific gravity, and/or urobilinogen. Urinalysis can quickly screen for conditions that do not immediately produce symptoms such as diabetes mellitus, kidney disease, or urinary tract infection. A dip stick allows qualitative and semi-quantitative analysis using a paper or plastic stick with color strips for each agent being tested. The stick is dipped in the urine specimen and the color strips are then compared to a color chart to determine the presence or absence and/or a rough estimate of the concentration of each agent tested. Reagent tablets use an absorbent mat with a few drops of urine placed on the mat followed by a reagent tablet. A drop of distilled, deionized water is then placed on the tablet and the color change is observed. Bilirubin is a byproduct of the breakdown of red blood cells by the liver. Normally bilirubin is excreted through the bowel, but in patients with liver disease, bilirubin is filtered by the kidneys and excreted in the urine. Glucose is a sugar that is normally filtered by the glomerulus and excreted only in small quantities in the urine. Excess sugar in the urine (glycosuria) is indicative of diabetes mellitus. The peroxidase activity of erythrocytes is used to detect hemoglobin in the urine which may be indicative of hematuria, myoglobinuria, or hemoglobinuria. Ketones in the urine are the result of diabetic ketoacidosis or calorie deprivation (starvation). A leukocyte esterase test identifies the presence of white blood cells in the urine. The presence of nitrites in the urine is indicative of bacteria. The pH identifies the acid-base levels in the urine. The presence of excessive amounts of protein (proteinuria) may be indicative of nephrotic syndrome. Specific gravity measures urine density and is indicative of the kidneys' ability to concentrate and dilute urine. Following dip stick or reagent testing, the urine sample may be examined under a microscope. The urine sample is placed in a test tube and centrifuged. The sediment is resuspended. A drop of the resuspended sediment is then placed on a glass slide, cover-slipped, and examined under a microscope for crystals, casts, squamous cells, blood (white, red) cells, and bacteria.

Biopsy of the esophagus, stomach, and/or upper small bowel using an endoscope [CPT 43239]

An upper gastrointestinal (UGI) endoscopic examination, also referred to as an esophagogastroduodenoscopy (EGD), is performed on the esophagus, stomach, duodenum and/or jejunum with biopsy(s). The mouth and throat are numbed using an anesthetic spray. A hollow mouthpiece is placed in the mouth. The flexible fiberoptic endoscope is then inserted and advanced as it is swallowed by the patient. Once the endoscope has been advanced beyond the cricopharyngeal region, it is guided using direct visualization. The esophagus is inspected and any abnormalities are noted. The endoscope is then advanced beyond the gastroesophageal junction into the stomach and the stomach is insufflated with air. The cardia, fundus, greater and lesser curvature, and antrum are inspected and any abnormalities are noted. The tip of the endoscope is then advanced through the pylorus and into the duodenum and/or jejunum where mucosal surfaces are inspected for any abnormalities. Single or multiple samples of suspect tissue are taken through the scope. The endoscope is withdrawn and mucosal surfaces are again inspected for ulcerations, varices, bleeding sites, lesions, strictures, or other abnormalities.

Biopsy of the large bowel using an endoscope (colonoscopy) [CPT 45380]

A flexible colonoscopy is performed with single or multiple biopsies. The colonoscope is inserted into the rectum and advanced through the colon to the cecum or a point within the terminal ileum, using air insufflation to separate the mucosal folds for better visualization. Mucosal surfaces of the colon are inspected and any abnormalities are noted. The endoscope is then withdrawn and mucosal surfaces are again inspected for ulcerations, varices, bleeding sites, lesions, strictures, or other abnormalities. Any suspect site(s) to be biopsied is identified and biopsy forceps are placed through the biopsy channel in the endoscope. The forceps are opened, the tissue is spiked, and the forceps are closed. The biopsied tissue is then removed through the endoscope. One or more tissue samples may be obtained and are sent for separately reportable laboratory analysis.

Blood test, basic group of blood chemicals (Calcium, total) [CPT 80048]

A basic metabolic blood panel is obtained that includes ionized calcium levels along with carbon dioxide (bicarbonate) (CO2), chloride, creatinine, glucose, potassium, sodium, and urea nitrogen (BUN). A basic metabolic panel with measurement of ionized calcium may be used to screen for or monitor overall metabolic function or identify imbalances. Ionized or free calcium flows freely in the blood, is not attached to any proteins, and represents the amount of calcium available to support metabolic processes such as heart function, muscle contraction, nerve function, and blood clotting. Total carbon dioxide (bicarbonate) (CO2) level is composed of CO2, bicarbonate (HCO3-), and carbonic acid (H2CO3) with the primary constituent being bicarbonate, a negatively charged electrolyte that works in conjunction with other electrolytes, such as potassium, sodium, and chloride, to maintain proper acid-base balance and electrical neutrality at the cellular level. Chloride is also a negatively charged electrolyte that helps regulate body fluid and maintain proper acid-base balance. Creatinine is a waste product excreted by the kidneys that is produced in the muscles while breaking down creatine, a compound used by the muscles to create energy. Blood levels of creatinine provide a good measurement of renal function. Glucose is a simple sugar and the main source of energy for the body, regulated by insulin. When more glucose is available than is required, it is stored in the liver as glycogen or stored in adipose tissue as fat. Glucose measurement determines whether the glucose/insulin metabolic process is functioning properly. Both potassium and sodium are positively charged electrolytes that work in conjunction with other electrolytes to regulate body fluid, stimulate muscle contraction, and maintain proper acid-base balance and both are essential for maintaining normal metabolic processes. Urea is a waste product produced in the liver by the breakdown of protein from a sequence of chemical reactions referred to as the urea or Krebs-Henseleit cycle. Urea is taken up by the kidneys and excreted in the urine. Blood urea nitrogen, BUN, is a measure of renal function, and helps monitor renal disease and the effectiveness of dialysis.

Blood test, clotting time [CPT 85610]

Prothrombin time (PT) measures how long it takes for blood to clot. Prothrombin, also called factor II, is one of the clotting factors made by the liver and adequate levels of vitamin K are needed for the liver to produce sufficient prothrombin. Prothrombin time is used to help identify the cause of abnormal bleeding or bruising; to check whether blood thinning medication, such as warfarin (Coumadin), is working; to check for low levels of blood clotting factors I, II, V, VII, and X; to check for low levels of vitamin K; to check liver function, to see how quickly the body is using up its clotting factors. The test is performed using electromagnetic mechanical clot detection. If prothrombin time is elevated and the patient is not on a blood thinning medication, a second prothrombin time using substitution plasma fractions, also referred to as a prothrombin time mixing study, may be performed. This is performed by mixing patient plasma with normal plasma using a 1:1 mix. The mixture is incubated and the clotting time is again measured. If the result does not correct, it may be indicative that the patient has an inhibitor, such as lupus anticoagulant. If the result does correct, the patient may have a coagulation factor deficiency.

Blood test, comprehensive group of blood chemicals [CPT 80053]

A comprehensive metabolic panel is obtained that includes albumin, bilirubin, total calcium, carbon dioxide, chloride, creatinine, glucose, alkaline phosphatase, potassium, total protein, sodium, alanine amino transferase (ALT) (SGPT), aspartate amino transferase (AST) (SGOT), and urea nitrogen (BUN). This test is used to evaluate electrolytes and fluid balance as well as liver and kidney function. It is also used to help rule out conditions such as diabetes. Tests related to electrolytes and fluid balance include: carbon dioxide, chloride, potassium, and sodium. Tests specific to liver function include: albumin, bilirubin, alkaline phosphatase, ALT, AST, and total protein. Tests specific to kidney function include: BUN and creatinine. Calcium is needed to support metabolic processes such as heart function, muscle contraction, nerve function, and blood clotting. Glucose is the main source of energy for the body and is regulated by insulin. Glucose measurement determines whether the glucose/insulin metabolic process is functioning properly.

Blood test, lipids (cholesterol and triglycerides) [CPT 80061]

"A lipid panel is obtained to assess the risk for cardiovascular disease and to monitor appropriate treatment. Lipids are comprised of cholesterol, protein, and triglycerides. They are stored in cells and circulate in the blood. Lipids are important for cell health and as an energy source. A lipid panel should include a measurement of triglycerides and total serum cholesterol and then calculate to find the measurement of high density lipoprotein (HDL-C), low density lipoprotein (LDL-C) and very low density lipoprotein (VLDL-C). HDL contains the highest ratio of cholesterol and is often referred to as ""good cholesterol"" because it is capable of transporting excess cholesterol in the blood to the liver for removal. LDL contains the highest ratio of protein and is considered ""bad cholesterol"" because it transports and deposits cholesterol in the walls of blood vessels. VLDL contains the highest ratio of triglycerides and high levels are also considered ""bad"" because it converts to LDL after depositing triglyceride molecules in the walls of blood vessels. A blood sample is obtained by separately reportable venipuncture or finger stick. Serum/plasma is tested using quantitative enzymatic method."

Blood test, thyroid stimulating hormone (TSH) [CPT 84443]

A blood test is performed to determine levels of thyroid stimulating hormone (TSH). TSH is produced in the pituitary and helps to regulate two other thyroid hormones, triiodothyronine (T3) and thyroxin (T4), which in turn help regulate the body's metabolic processes. TSH levels are tested to determine whether the thyroid is functioning properly. Patients with symptoms of weight gain, tiredness, dry skin, constipation, or menstrual irregularities may have an underactive thyroid (hypothyroidism). Patients with symptoms of weight loss, rapid heart rate, nervousness, diarrhea, feeling of being too hot, or menstrual irregularities may have an overactive thyroid (hypothyroidism). TSH levels are also periodically tested in individuals on thyroid medications. The test is performed by electrochemiluminescent immunoassay.

CT scan head or brain [CPT 70450]

Computerized tomography, also referred to as a CT scan, uses special x-ray equipment and computer technology to produce multiple cross-sectional images of the region being studied. In this study, CT scan of the head or brain is performed. The patient is positioned on the CT examination table. An initial pass is made through the CT scanner to determine the starting position of the scans after which the CT scan is performed. As the table moves slowly through the scanner, numerous x-ray beams and electronic x-ray detectors rotate around the body region being examined. The amount of radiation being absorbed is measured. As the beams and detectors rotate around the body, the table is moved through the scanner. A computer program processes the data and renders the data in two-dimensional cross-sectional images of the body region being examined. This data is displayed on a monitor. The physician reviews the data as it is being obtained and may request additional sections to provide more detail of areas of interest.

CT scan of abdomen and pelvis with contrast [CPT 74177]

Computerized tomography, also referred to as a CT scan, uses special x-ray equipment and computer technology to produce multiple cross-sectional images of the abdomen and pelvis. The patient is positioned on the CT examination table. An initial pass is made through the CT scanner to determine the starting position of the scans. The CT scan is then performed. As the table moves slowly through the scanner, numerous x-ray beams and electronic x-ray detectors rotate around the abdomen and pelvis. The amount of radiation being absorbed is measured. As the beams and detectors rotate around the body, the table is moved through the scanner. A computer program processes the data which is then displayed on the monitor as two-dimensional cross-sectional images of the abdomen or pelvis. The physician reviews the data and images as they are obtained and may request additional sections to provide more detail on areas of interest.

CT scan pelvis with contrast [CPT 72193]

Diagnostic computed tomography (CT) is done on the pelvis to provide detailed visualization of the organs and structures within or near the pelvis, such as kidneys, bladder, prostate, uterus, cervix, vagina, lymph nodes, and pelvic bones. CT uses multiple, narrow x-ray beams aimed around a single rotational axis, taking a series of 2D images of the target structure from multiple angles. Contrast material is used to enhance the images. Computer software processes the data and produces several images of thin, cross-sectional 2D slices of the targeted organ or area. Three-dimensional models of organs within the pelvis can be created by stacking multiple, individual 2D slices together. The patient is placed inside the CT scanner on the table and images are obtained of the pelvis area. The physician reviews the images to gather information for specified purposes such as diagnosing or monitoring cancer, evaluating the pelvic bones for fractures or other injury following trauma, locating abscesses or masses found during physical exam, finding the cause of pelvic pain, providing more detailed information before surgery, and evaluating the patient after surgery.

Coagulation assessment blood test, plasma or whole blood [CPT 85730]

This test may also be referred to as an activated PTT or aPTT. PTT may be performed to diagnose the cause of bleeding or as a screening test prior to surgery to rule-out coagulation defects. A silica and synthetic phospholipid PTT reagent is mixed with the patient plasma. The silica provides a negatively-charged particulate surface that activates the contact pathway for coagulation. Clot formation is initiated by adding calcium chloride to the mixture. Clotting time is measured photo-optically.

Complete blood cell count (red cells, white blood cell, platelets), automated test [CPT 85027]

An automated complete blood count (CBC) is performed with or without automated differential white blood cell (WBC) count. A CBC is used as a screening test to evaluate overall health and symptoms such as fatigue, bruising, bleeding, and inflammation, or to help diagnose infection. A CBC includes measurement of hemoglobin (Hgb) and hematocrit (Hct), red blood cell (RBC) count, white blood cell (WBC) count with or without differential, and platelet count. Hgb measures the amount of oxygen-carrying protein in the blood. Hct refers to the volume of red blood cells (erythrocytes) in a given volume of blood and is usually expressed as a percentage of total blood volume. RBC count is the number of red blood cells (erythrocytes) in a specific volume of blood. WBC count is the number of white blood cells (leukocytes) in a specific volume of blood. There are five types of WBCs: neutrophils, eosinophils, basophils, monocytes, and lymphocytes. If a differential is performed, each of the five types is counted separately. Platelet count is the number of platelets (thrombocytes) in the blood. Platelets are responsible for blood clotting. The CBC is performed with an automated blood cell counting instrument that can also be programmed to provide an automated WBC differential count.

Complete blood cell count (red cells, white blood cell, platelets), automated test and automated differential white blood cell count [CPT 85025]

An automated complete blood count (CBC) is performed with or without automated differential white blood cell (WBC) count. A CBC is used as a screening test to evaluate overall health and symptoms such as fatigue, bruising, bleeding, and inflammation, or to help diagnose infection. A CBC includes measurement of hemoglobin (Hgb) and hematocrit (Hct), red blood cell (RBC) count, white blood cell (WBC) count with or without differential, and platelet count. Hgb measures the amount of oxygen-carrying protein in the blood. Hct refers to the volume of red blood cells (erythrocytes) in a given volume of blood and is usually expressed as a percentage of total blood volume. RBC count is the number of red blood cells (erythrocytes) in a specific volume of blood. WBC count is the number of white blood cells (leukocytes) in a specific volume of blood. There are five types of WBCs: neutrophils, eosinophils, basophils, monocytes, and lymphocytes. If a differential is performed, each of the five types is counted separately. Platelet count is the number of platelets (thrombocytes) in the blood. Platelets are responsible for blood clotting. The CBC is performed with an automated blood cell counting instrument that can also be programmed to provide an automated WBC differential count.

Diagnostic examination of esophagus, stomach, and/or upper small bowel using an endoscope [CPT 43235]

A diagnostic upper gastrointestinal (UGI) endoscopic examination is performed of the esophagus, stomach, duodenum and/or jejunum with or without collection of specimens by brushing or washing. This procedure may also be referred to as an esophagogastroduodenoscopy (EGD). The mouth and throat are numbed using an anesthetic spray. A hollow mouthpiece is placed in the mouth. The flexible fiberoptic endoscope is then inserted and advanced as it is swallowed by the patient. Once the endoscope has been advanced beyond the cricopharyngeal region, it is guided using direct visualization. The esophagus is inspected and any abnormalities are noted. The endoscope is then advanced beyond the gastroesophageal junction into the stomach and the stomach is insufflated with air. The cardia, fundus, greater and lesser curvature, and antrum of the stomach are inspected and any abnormalities are noted. The tip of the endoscope is then advanced through the pylorus and into the duodenum and/or jejunum. Mucosal surfaces of the duodenum and/or jejunum are inspected and any abnormalities are noted. The endoscope is then withdrawn and mucosal surfaces are again inspected for ulcerations, varices, bleeding sites, lesions, strictures, or other abnormalities. Cytology samples may be obtained by cell brushing or washing.

Diagnostic examination of the colon (large bowel) using an endoscope(colonoscopy); high risk [CPT 45378]

A flexible colonoscopy is performed with or without collection of specimens by brushing or washing. The colonoscope is inserted into the rectum and advanced through the colon to the cecum or a point within the terminal ileum, using air insufflation to separate the mucosal folds for better visualization. Mucosal surfaces of the colon are inspected and any abnormalities are noted. The endoscope is then withdrawn as mucosal surfaces are again inspected for ulcerations, varices, bleeding sites, lesions, strictures, or other abnormalities. Cytology (cell) samples may be obtained using a brush introduced through the endoscope. Alternatively, sterile water may be introduced to wash the mucosal lining and the fluid aspirated to obtain cell samples. Cytology samples are sent for separately reportable laboratory analysis.

Diagnostic mammography of both breasts [CPT 77066]

These codes report diagnostic mammography of one breast or both breasts with computer-aided lesion detection (CAD), when performed. Mammography is the radiographic imaging of the breast using low-dose ionizing radiation. The x-rays used in mammography have a longer wavelength that those typically used for bone imaging. The test is done to detect tumors or cysts in women who have symptoms of breast disease or a palpable mass. The breast is compressed between planes on a machine dedicated strictly to mammography. This evens out the dense tissue and holds the breast still for a better quality image. Computer-aided detection uses algorithm analysis of the image data obtained from the mammographic films, with or without digitization of the radiographic images. The mammographic picture of the breast is used by scanning the x-ray film with a laser beam, usually converting the scanned image of the analog film into digital data for the computer first, then employing a methodical, step-by-step pattern of analyzing the data on video display for unusual or suspicious areas.

Diagnostic mammography of one breast [CPT 77065]

These codes report diagnostic mammography of one breast or both breasts with computer-aided lesion detection (CAD), when performed. Mammography is the radiographic imaging of the breast using low-dose ionizing radiation. The x-rays used in mammography have a longer wavelength that those typically used for bone imaging. The test is done to detect tumors or cysts in women who have symptoms of breast disease or a palpable mass. The breast is compressed between planes on a machine dedicated strictly to mammography. This evens out the dense tissue and holds the breast still for a better quality image. Computer-aided detection uses algorithm analysis of the image data obtained from the mammographic films, with or without digitization of the radiographic images. The mammographic picture of the breast is used by scanning the x-ray film with a laser beam, usually converting the scanned image of the analog film into digital data for the computer first, then employing a methodical, step-by-step pattern of analyzing the data on video display for unusual or suspicious areas.

Injection of substance into spinal canal of lower back or sacrum [CPT 62322]

Injection of substance into spinal canal of lower back or sacrum using imaging guidance [CPT 62323]

Injections of anesthetic and/or steroid drug into lower or sacral spine nerve root using imaging guidance, single level [CPT 64483]

Kidney function blood test panel [CPT 80069]

A renal panel is obtained for routine health screening and to monitor conditions such as diabetes, renal disease, liver disease, nutritional disorders, thyroid and parathyroid function, and interventional drug therapies. Tests in a renal panel include glucose or blood sugar; electrolytes and minerals as sodium, potassium, chloride, total calcium, and phosphorus; the waste products blood urea nitrogen (BUN) and creatinine; a protein called albumin; and bicarbonate (carbon dioxide, CO2) responsible for acid base balance. Glucose is the main source of energy for the body and is regulated by insulin. High levels may indicate diabetes or impaired kidney function. Sodium is found primarily outside cells and maintains water balance in the tissues, as well as nerve and muscle function. Potassium is primarily found inside cells and affects heart rhythm, cell metabolism, and muscle function. Chloride moves freely in and out of cells to regulate fluid levels and help maintain electrical neutrality. Calcium is needed to support metabolic processes, heart and nerve function, muscle contraction, and blood clotting. Phosphorus is essential for energy production, nerve and muscle function, and bone growth. Blood urea nitrogen (BUN) and creatinine are waste products from tissue breakdown that circulate in the blood and are filtered out by the kidneys. Albumin, a protein made by the liver, helps to nourish tissue and transport hormones, vitamins, drugs, and calcium throughout the body. Bicarbonate (HCO3) may also be referred to as carbon dioxide (CO2) maintains body pH or the acid/base balance. A specimen is obtained by separately reportable venipuncture. Serum/plasma is tested using quantitative chemiluminescent immunoassay or quantitative enzyme-linked immunosorbent assay.

Liver function blood test panel [CPT 80076]

A hepatic function panel is obtained to diagnose acute and chronic liver disease, inflammation, or scarring and to monitor hepatic function while taking certain medications. Tests in a hepatic function panel should include albumin (ALB), total and direct bilirubin, alkaline phosphatase (ALP), total protein (TP), alanine aminotransferase (ALT, SGPT), and aspartate aminotransferase (AST, SGOT). Albumin (ALB) is a protein made by the liver that helps to nourish tissue and transport hormones, vitamins, drugs, and calcium throughout the body. Bilirubin, a waste product from the breakdown of red blood cells, is removed by the liver in a conjugated state. Bilirubin is measured as total (all the bilirubin circulating in the blood) and direct (the conjugated amount only) to determine how well the liver is performing. Alkaline phosphatase (ALP) is an enzyme produced by the liver and other organs of the body. In the liver, cells along the bile duct produce ALP. Blockage of these ducts can cause elevated levels of ALP, whereas cirrhosis, cancer, and toxic drugs will decrease ALP levels. Circulating blood proteins include albumin (60% of total) and globulins (40% of total). By measuring total protein (TP) and albumin (ALB), the albumin/globulin (A/G) ratio can be determined and monitored. TP may decrease with malnutrition, congestive heart failure, hepatic disease, and renal disease and increase with inflammation and dehydration. Alanine aminotransferase (ALT, SGPT) is an enzyme produced primarily in the liver and kidneys. In healthy individuals ALT is normally low. ALT is released when the liver is damaged, especially with exposure to toxic substances such as drugs and alcohol. Aspartate aminotransferase (AST, SGOT) is an enzyme produced by the liver, heart, kidneys, and muscles. In healthy individuals AST is normally low. An AST/ALT ratio is often performed to determine if elevated levels are due to liver injury or damage to the heart or skeletal muscles. A specimen is obtained by separately reportable venipuncture. Serum/plasma is tested using quantitative enzymatic method or quantitative spectrophotometry.

MRI scan of brain before and after contrast [CPT 70553]

Magnetic resonance imaging is done on the brain. MRI is a noninvasive, non-radiating imaging technique that uses the magnetic properties of hydrogen atoms in the body. The patient is placed on a motorized table within a large MRI tunnel scanner that contains the magnet. The powerful magnetic field forces the hydrogen atoms to line up. Radiowaves are then transmitted within the strong magnetic field. Protons in the nuclei of different types of tissues emit a specific radiofrequency signal that bounces back to the computer, which processes the signals and converts the data into tomographic, 3D images with very high resolution. MRI of the brain provides reliable information for diagnosing the presence, location, and extent of tumors, cysts, or other masses; swelling and infection; vascular disorders or malformations, such as aneurysms and intracranial hemorrhage; disease of the pituitary gland; stroke; developmental and structural anomalies of the brain; hydrocephalus; and chronic conditions and diseases affecting the central nervous system such as headaches and multiple sclerosis.

MRI scan of leg joint [CPT 73721]

Magnetic resonance imaging is done on a joint of the upper or lower leg. Magnetic resonance is a noninvasive, non-radiating imaging technique that uses the magnetic properties of hydrogen atoms in the body. The patient is placed on a motorized table within a large MRI tunnel scanner that contains the magnet. The powerful magnetic field forces the hydrogen atoms to line up. Radiowaves are then transmitted within the strong magnetic field. Protons in the nuclei of different types of tissues emit a specific radiofrequency signal that bounces back to the computer, which processes the signals and converts the data into tomographic, 3D images with very high resolution. The patient is placed on a motorized table within a large MRI tunnel scanner that contains the magnet. Small coils that help transmit and receive the radiowaves may be placed around the joint. MRI scans on joints of the lower extremity are often done for injury, trauma, unexplained pain, redness, or swelling, and freezing of a joint with loss of motion. MRI scans provide clear images of areas that may be difficult to see on CT. The physician reviews the images to look for information that may correlate to the patient's signs or symptoms. MRI provides reliable information on the presence and extent of tumors, masses, or lesions within the joint; infection, inflammation, and swelling of soft tissue; muscle atrophy and other anomalous muscular development; and joint effusion and vascular necrosis.

MRI scan of lower spinal canal [CPT 72148]

Magnetic resonance imaging (MRI) is done on the lumbar spinal canal and contents. MRI is a noninvasive, non-radiating imaging technique that uses the magnetic properties of nuclei within hydrogen atoms of the body. The powerful magnetic field forces the hydrogen atoms to line up. Radiowaves are then transmitted within the strong magnetic field. Protons in the nuclei of different types of tissues emit a specific radiofrequency signal that bounces back to the computer, which records the images. The computer processes the signals and coverts the data into tomographic, 3D, sectional images in slices with very high resolution. The patient is placed on a motorized table within a large MRI tunnel scanner that contains the magnet. MRI scans of the spine are often done when conservative treatment of back pain is unsuccessful and more aggressive treatments are considered or following surgery. The physician reviews the images to look for specific information that may correlate to the patient's symptoms, such as abnormal spinal alignment; disease or injury of vertebral bodies; intervertebral disc herniation, degeneration, or dehydration; the size of the spinal canal to accommodate the cord and nerve roots; pinched or inflamed nerves; or any changes since surgery.

Manual urinalysis test with examination using microscope, automated [CPT 81001]

A urinalysis is performed by dip stick or tablet reagent for bilirubin, glucose, hemoglobin, ketones, leukocytes, nitrite, pH, protein, specific gravity, and/or urobilinogen. Urinalysis can quickly screen for conditions that do not immediately produce symptoms such as diabetes mellitus, kidney disease, or urinary tract infection. A dip stick allows qualitative and semi-quantitative analysis using a paper or plastic stick with color strips for each agent being tested. The stick is dipped in the urine specimen and the color strips are then compared to a color chart to determine the presence or absence and/or a rough estimate of the concentration of each agent tested. Reagent tablets use an absorbent mat with a few drops of urine placed on the mat followed by a reagent tablet. A drop of distilled, deionized water is then placed on the tablet and the color change is observed. Bilirubin is a byproduct of the breakdown of red blood cells by the liver. Normally bilirubin is excreted through the bowel, but in patients with liver disease, bilirubin is filtered by the kidneys and excreted in the urine. Glucose is a sugar that is normally filtered by the glomerulus and excreted only in small quantities in the urine. Excess sugar in the urine (glycosuria) is indicative of diabetes mellitus. The peroxidase activity of erythrocytes is used to detect hemoglobin in the urine which may be indicative of hematuria, myoglobinuria, or hemoglobinuria. Ketones in the urine are the result of diabetic ketoacidosis or calorie deprivation (starvation). A leukocyte esterase test identifies the presence of white blood cells in the urine. The presence of nitrites in the urine is indicative of bacteria. The pH identifies the acid-base levels in the urine. The presence of excessive amounts of protein (proteinuria) may be indicative of nephrotic syndrome. Specific gravity measures urine density and is indicative of the kidneys' ability to concentrate and dilute urine. Following dip stick or reagent testing, the urine sample may be examined under a microscope. The urine sample is placed in a test tube and centrifuged. The sediment is resuspended. A drop of the resuspended sediment is then placed on a glass slide, cover-slipped, and examined under a microscope for crystals, casts, squamous cells, blood (white, red) cells, and bacteria.

New patient outpatient visit, total time 30-44 minutes [CPT 99203]

New patient visit requiring a detailed history and examination, for a low complexity medical issue of moderate severity

New patient outpatient visit, total time 45-59 minutes [CPT 99204]

New patient outpatient visit, total time 60-74 minutes [CPT 99205]

New patient visit requiring a comprehensive history and examination, for a high complexity medical issue of moderate to high severity

PSA (prostate specific antigen) measurement, total [CPT 84153]

Prostate specific antigen (PSA) is measured. PSA is a protein produced by normal prostate cells found in serum and exists in both free form and complexed with other proteins. Total PSA is measured ad the total amount of both free and complexed forms. Total PSA levels are higher in men with benign prostatic hyperplasia (BPH), acute bacterial prostatitis, or prostate cancer. Total PSA is used to screen for prostate cancer and evaluate the response to treatment in those with prostate cancer, but cannot be used by itself to definitively diagnose prostate cancer.

Removal of cataract with insertion of lens, simple [CPT 66984]

Removal of gallbladder using an endoscope [CPT 47562]

The gallbladder is removed by laparoscopic technique. A small portal incision is made at the navel and a trocar is inserted. The scope and video camera are then inserted at this site. The abdomen is inflated with carbon dioxide. Two to three additional abdominal portal incisions are made and trocars are inserted for placing surgical instruments. The gallbladder is identified. If the gallbladder is distended, a needle may be used to drain bile from the gallbladder. Grasper clamps are applied. The Hartmann's pouch is identified and retracted, exposing the triangle of Calot. The cystic artery and cystic duct are identified. The cystic duct is dissected free and transected. The cystic artery is dissected free, ligated, and doubly divided. Electrocautery is used to dissect the gallbladder off the liver bed. The gallbladder is placed in an extraction sac and removed from the abdomen through one of the small incisions.

Removal of one knee cartilage using an endoscope [CPT 29881]

Removal of polyps or growths in large bowel using an endoscope (colonoscopy) using a mechanical snare [CPT 45385]

A flexible colonoscopy is performed with removal of tumors, polyps, or other lesions by hot biopsy forceps or snare technique. The colonoscope is inserted into the rectum and advanced through the colon to the cecum or a point within the terminal ileum, using air insufflation to separate the mucosal folds for better visualization. Mucosal surfaces of the colon are inspected and any abnormalities are noted. The tumor, polyp, or other lesion is identified. Hot biopsy method uses insulated monopolar forceps to remove and electrocoagulate (cauterize) tissue simultaneously. Hot biopsy forceps are used primarily for removal of small polyps and treatment of vascular ectasias. A wire snare loop is placed around the lesion. The loop is heated to shave off and cauterize the lesion. Lesions may be removed en bloc with one placement of the snare or in a piecemeal fashion which requires multiple applications of the snare. The endoscope is withdrawn and mucosal surfaces are again inspected for ulcerations, bleeding sites, lesions, strictures, or other abnormalities.

Removal of recurring cataract in lens capsule using laser [CPT 66821]

Repair of groin hernia patient age 5 years or older [CPT 49505]

An initial inguinal hernia repair is performed on a patient who is five years or older. An inguinal hernia is a condition where structures protrude through a weakness in the abdominal wall in the groin area. Incarcerated hernia tissue cannot be pushed back into its normal position. Strangulated hernias are those in which circulation is compromised. An incision is made over the internal ring. The skin, fat, and subcutaneous fascia are incised down to the aponeurosis of the external oblique muscle. The external ring is identified and the external oblique aponeurosis is slit. The internal ring is opened and the inguinal canal is exposed. In males, the spermatic cord and its covering are mobilized and the covering is removed. The hernia sac is dissected free into the retroperitoneum, opened, and inspected for the presence of bowel or bladder wall. Any bowel or bladder content is reduced (pushed back into the abdominal cavity) and the hernia sac is transected and inverted into the abdominal cavity. A mesh plug may be placed to reinforce the repair. In women, the sac is inspected for the ovary. If the ovary is present, it is returned to the abdomen. The sac is then resected together with the round ligament. The internal ring is closed and the posterior wall of the inguinal canal is repaired.

Screening mammography of both breasts [CPT 77067]

Bilateral screening mammography is done with computer-aided lesion detection (CAD), when performed. Mammography is the radiographic imaging of the breast using low-dose ionizing radiation. The x-rays used in mammography have a longer wavelength than those typically used for bone imaging. A screening mammogram is done on asymptomatic women for early breast cancer detection when there are no known palpable masses. This is done on both breasts with two views taken on each side. The breast is compressed between planes on a machine dedicated strictly to mammography. This evens out the dense tissue and holds the breast still for a better quality image. Computer-aided detection uses algorithm analysis of the image data obtained from the mammographic films, with or without digitization of the radiographic images. The mammographic picture of the breast is used by scanning the x-ray film with a laser beam, usually converting the scanned image of the analog film into digital data for the computer first, then employing a methodical, step-by-step pattern of analyzing the data on video display for unusual or suspicious areas.

Therapeutic exercise to develop strength, endurance, range of motion, and flexibility, each 15 minutes [CPT 97110]

Therapeutic exercise is the application of careful, graduated force to the body to increase strength, endurance, range of motion, and flexibility. Increased muscle strength is achieved by the deliberate overloading of a targeted muscle or muscle group and improved endurance is achieved by raising the intensity of the strengthening exercise to the targeted area(s) over a prolonged period of time. To maintain range of motion (ROM) and flexibility requires the careful movement and stretching of contractile and non-contractile tissue that may tighten with injury or neurological disease, causing weakness and/or spasticity. Therapeutic exercise can increase blood flow to the targeted area, reduce pain and inflammation, reduce the risk of blood clots from venous stasis, decrease muscle atrophy and improve coordination and motor control. Therapeutic exercise may be prescribed following acute illness or injury and for chronic conditions that affect physical activity or function.

Total Knee or Hip Replacement

Ultrasound of abdomen, complete [CPT 76700]

A real time abdominal ultrasound is performed with image documentation. The patient is placed supine. Acoustic coupling gel is applied to the skin of the abdomen. The transducer is pressed firmly against the skin and swept back and forth over the abdomen and images obtained. The ultrasonic wave pulses directed at the abdomen are imaged by recording the ultrasound echoes. Any abnormalities are evaluated to identify characteristics that might provide a definitive diagnosis. The physician reviews the ultrasound images of the abdomen and provides a written interpretation.

Ultrasound pelvis through vagina [CPT 76830]

A transvaginal ultrasound is performed to evaluate the non-pregnant uterus and other pelvic structures. Conditions that may be evaluated by transvaginal ultrasound include infertility, abnormal bleeding, unexplained pain, congenital anomalies of the ovaries and uterus, ovarian cysts and tumors, pelvic inflammatory disease, bladder abnormalities, and intrauterine device (IUD) location. The patient is asked to empty the bladder and then lies back with the feet in stirrups. A protective cover is placed over the transducer and acoustic coupling gel is applied. The transducer is inserted into the vagina. Images of the uterus, ovaries, and surrounding pelvic structures are obtained from different orientations of the transducer. The ultrasonic wave pulses directed at the pelvic structures are imaged by recording the ultrasound echoes. The uterus is examined and endometrial thickness is determined. The ovaries are examined and any ovarian masses are carefully evaluated. The bladder and other pelvic structures are examined and any abnormalities are noted. The physician reviews the transvaginal ultrasound images and provides a written interpretation.

Urinalysis, manual test [CPT 81002]

A urinalysis is performed by dip stick or tablet reagent for bilirubin, glucose, hemoglobin, ketones, leukocytes, nitrite, pH, protein, specific gravity, and/or urobilinogen. Urinalysis can quickly screen for conditions that do not immediately produce symptoms such as diabetes mellitus, kidney disease, or urinary tract infection. A dip stick allows qualitative and semi-quantitative analysis using a paper or plastic stick with color strips for each agent being tested. The stick is dipped in the urine specimen and the color strips are then compared to a color chart to determine the presence or absence and/or a rough estimate of the concentration of each agent tested. Reagent tablets use an absorbent mat with a few drops of urine placed on the mat followed by a reagent tablet. A drop of distilled, deionized water is then placed on the tablet and the color change is observed. Bilirubin is a byproduct of the breakdown of red blood cells by the liver. Normally bilirubin is excreted through the bowel, but in patients with liver disease, bilirubin is filtered by the kidneys and excreted in the urine. Glucose is a sugar that is normally filtered by the glomerulus and excreted only in small quantities in the urine. Excess sugar in the urine (glycosuria) is indicative of diabetes mellitus. The peroxidase activity of erythrocytes is used to detect hemoglobin in the urine which may be indicative of hematuria, myoglobinuria, or hemoglobinuria. Ketones in the urine are the result of diabetic ketoacidosis or calorie deprivation (starvation). A leukocyte esterase test identifies the presence of white blood cells in the urine. The presence of nitrites in the urine is indicative of bacteria. The pH identifies the acid-base levels in the urine. The presence of excessive amounts of protein (proteinuria) may be indicative of nephrotic syndrome. Specific gravity measures urine density and is indicative of the kidneys' ability to concentrate and dilute urine. Following dip stick or reagent testing, the urine sample may be examined under a microscope. The urine sample is placed in a test tube and centrifuged. The sediment is resuspended. A drop of the resuspended sediment is then placed on a glass slide, cover-slipped, and examined under a microscope for crystals, casts, squamous cells, blood (white, red) cells, and bacteria.

X-ray of lower and sacral spine, minimum of 4 views [CPT 72110]

A radiologic exam is done of the lumbosacral spine. Frontal, posteroanterior, and lateral views are the most common projections taken. X-ray uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures.

Advance care planning by the physician or other qualified health care professional, first 30 minutes [CPT 99497]

Established patient outpatient visit, minimal presenting problem [CPT 99211]

Established patient visit for a minor complaint

Established patient outpatient visit, total time 10-19 minutes [CPT 99212]

Established patient outpatient visit, total time 20-29 minutes [CPT 99213]

Established patient visit requiring an expanded problem-focused history and examination, for a low complexity medical issue of low to moderate severity

Established patient outpatient visit, total time 30-39 minutes [CPT 99214]

Established patient outpatient visit, total time 40-54 minutes [CPT 99215]

Established patient visit requiring a comprehensive history and examination, for a high complexity medical issue of moderate to high severity

Smoking and tobacco use intensive counseling, greater than 10 minutes [CPT 99407]

Smoking and tobacco use intermediate counseling, greater than 3 minutes up to 10 minutes [CPT 99406]

Transitional care management services, highly complexity, requiring face-to-face visits within 7 days of discharge [CPT 99496]

Transitional care management services, moderately complexity, requiring face-to-face visits within 14 days of discharge [CPT 99495]

Critical care delivery critically ill or injured patient [CPT 99292]

Critical care, evaluation and management of the critically ill or critically injured patient; each additional 30 minutes

Critical care delivery critically ill or injured patient, first 30-74 minutes [CPT 99291]

Critical care, evaluation and management of the critically ill or critically injured patient; first 30-74 minutes

Emergency department visit, low to moderately severe problem [CPT 99282]

Emergency department visit for the evaluation and management of a patient, which requires these 3 key components: An expanded problem focused history; An expanded problem focused examination; and Medical decision making of low complexity. Counseling and/or coordination of care with other physicians, other qualified health care professionals, or agencies are provided consistent with the nature of the problem(s) and the patient's and/or family's needs. Usually, the presenting problem(s) are of low to moderate severity.

Emergency department visit, moderately severe problem [CPT 99283]

Emergency department visit for the evaluation and management of a patient, which requires these 3 key components: An expanded problem focused history; An expanded problem focused examination; and Medical decision making of moderate complexity. Counseling and/or coordination of care with other physicians, other qualified health care professionals, or agencies are provided consistent with the nature of the problem(s) and the patient's and/or family's needs. Usually, the presenting problem(s) are of moderate severity.

Emergency department visit, problem of high severity [CPT 99284]

Emergency department visit for the evaluation and management of a patient, which requires these 3 key components: A detailed history; A detailed examination; and Medical decision making of moderate complexity. Counseling and/or coordination of care with other physicians, other qualified health care professionals, or agencies are provided consistent with the nature of the problem(s) and the patient's and/or family's needs. Usually, the presenting problem(s) are of high severity, and require urgent evaluation by the physician or other qualified health care professionals but do not pose an immediate significant threat to life or physiologic function.

Emergency department visit, problem with significant threat to life or function [CPT 99285]

Emergency department visit for the evaluation and management of a patient, which requires these 3 key components within the constraints imposed by the urgency of the patient's clinical condition and/or mental status: A comprehensive history; A comprehensive examination; and Medical decision making of high complexity. Counseling and/or coordination of care with other physicians, other qualified health care professionals, or agencies are provided consistent with the nature of the problem(s) and the patient's and/or family's needs. Usually, the presenting problem(s) are of high severity and pose an immediate significant threat to life or physiologic function.

Emergency department visit, self limited or minor problem [CPT 99281]

Emergency department visit for the evaluation and management of a patient, which requires these 3 key components: A problem focused history; A problem focused examination; and Straightforward medical decision making. Counseling and/or coordination of care with other physicians, other qualified health care professionals, or agencies are provided consistent with the nature of the problem(s) and the patient's and/or family's needs. Usually, the presenting problem(s) are self limited or minor.

Ammonia level [CPT 82140]

A blood test is performed to measure ammonia levels. Ammonia is a by product of protein metabolism and is normally converted to urea by the liver and excreted via the kidney. Elevated ammonia levels may result from cirrhosis or hepatitis. Symptoms of elevated ammonia levels are confusion, tremors, excessive sleepiness, or coma. Testing may be performed in disease states such as Reyes syndrome or liver failure. A blood sample is obtained by a separately reportable venipuncture or arterial access line. The specimen is then tested using colorimetry.

Amylase (enzyme) level [CPT 82150]

Laboratory testing for amylase may be performed on blood, urine, and other body fluids. Amylase is an enzyme responsible for the break down of starches into sugar molecules (disaccharides and trisaccharides) and eventually into glucose for energy use by the cells. Amylase is produced in saliva and the pancreas. Abnormal amylase levels may result from pancreatic inflammation or trauma, perforated peptic ulcer, ovarian cyst (torsion), strangulation ileus, macroamylasemia, mumps, and cystic fibrosis. A blood or body fluid sample is obtained. The sample is then tested using quantitative enzymatic methodology.

Bacterial blood culture [CPT 87040]

A blood sample is drawn and placed in a medium conducive to the growth of bacteria. Any bacteria present in the blood sample will then reveal themselves.

Bacterial colony count, urine [CPT 87086]

"A laboratory test is performed to determine the presence or absence of bacterial colonies in urine and provide a colony count. Bacteria in urine may indicate an acute or chronic urinary tract infection (UTI) including pyelonephritis, cystitis, urethritis, or acute urethral syndrome. A urine sample is obtained by clean catch, mid-stream void or catheterization. Using a calibrated loop, the urine specimen is inoculated onto agar plates and incubated. Quantitative colony counts are determined and potential pathogens are identified. A colony count 10,000 cfu/mL is reported as ""organism present"" and may indicate an infection. Comingled flora of the urethra and mixed organisms in the colony counts are reported as ""mixed flora"" and most often represent contamination."

Bacterial urine culture [CPT 87088]

Bilirubin level, direct [CPT 82248]

A laboratory test is performed to measure total or direct bilirubin. Bilirubin is a pigmented waste product normally produced when red blood cells (RBCs) break down. Non-water soluble (unconjugated) bilirubin is carried on albumin to the liver where it attaches to sugar molecules to become conjugated. Conjugated (direct) bilirubin is water soluble and able to pass from the liver to the small intestine. Further breakdown of bilirubin occurs in the small intestine and it is eventually eliminated in the feces in the form of stercobilin. Total bilirubin is the sum of conjugated (direct) and unconjugated bilirubin. A test for either conjugated or direct bilirubin or total bilirubin may be ordered to diagnose and monitor liver disorders, hemolytic anemia, and newborn (physiologic) jaundice. A blood sample is obtained by separately reportable venipuncture or heel stick. Other body fluids, including cerebral spinal fluid, may be collected and tested for total bilirubin. Serum/plasma is tested using quantitative spectrophotometry.

Blood count, hemoglobin [CPT 85018]

A blood test is performed to determine hemoglobin (Hgb) which is a measurement of the amount of oxygen-carrying protein in the blood. Hgb is measured to determine the severity of anemia or polycythemia, monitor response to treatment for these conditions, or determine the need for blood transfusion. A blood sample is collected by separately reportable venipuncture or finger, heel, or ear stick. The sample may be sent to the lab or a rapid testing system may be used in the physician's office. Systems consist of a portable photometer and pipettes that contain reagent. The pipette is used to collect the blood sample from a capillary stick and the blood is automatically mixed with the reagent in the pipette. The photometer is then used to read the result which is displayed on the photometer device.

Blood creatinine level [CPT 82565]

A blood sample is taken to measure creatinine levels. Creatinine is a waste product produced by the muscles in the breakdown of creatine, which is a compound used by the muscles to create energy for contraction. The waste product, creatinine, is excreted by the kidneys and blood levels provide a good measurement of renal function. Creatinine may be checked to screen for or monitor treatment of renal disease. Creatinine levels may also be monitored in patients with acute or chronic illnesses that may impair renal function and in patients on medications that affect renal function. Creatinine is measured using spectrophotometry.

Blood gases measurement, with O2 saturation [CPT 82805]

Blood group typing (ABO) [CPT 86900]

A blood specimen is tested to determine blood type (ABO) or Rh(D). Blood is grouped using an ABO blood typing system which identifies four blood types: type A, B, AB, or O. The blood sample is mixed with antibodies against Type A and B blood and then checked to determine if the blood cells agglutinate, or stick together. Type A blood has anti-B antibodies; type B blood has anti-A antibodies; type O blood has antibodies to both A and B; and type AB blood does not have anti-A or anti-B antibodies. Type A blood agglutinates when type B antibodies are introduced. Type B blood agglutinates when type A antibodies are introduced. Type O blood agglutinates when type A or B antibodies are introduced. Type AB blood does not agglutinate when type A or B antibodies are introduced. The blood is then back typed. Blood serum is mixed with blood that is known to be type A or B.

Blood potassium level [CPT 84132]

A blood sample is obtained to measure potassium level. Potassium is a positively charged electrolyte that works in conjunction with other electrolytes, such as sodium, chloride, and carbon dioxide (CO2), to regulate body fluid, stimulate muscle contraction, and maintain proper acid-base balance. Potassium is found in all body fluids but mostly stored within cells, not in extracellular fluids, blood serum, or plasma. Small fluctuations in blood potassium, either too high (hyperkalemia) or too low (hypokalemia), can have serious, even life-threatening, consequences. Potassium level is used to screen for and monitor renal disease; monitor patients on certain medications, such as diuretics, as well as patients with acute and chronic conditions, such as dehydration or endocrine disorders. Because blood potassium affects heart rhythm and respiratory rate, it is routinely checked prior to major surgical procedures. Potassium is measured by ion-selective electrode (ISE) methodology.

Blood typing for Rh (D) antigen [CPT 86901]

A blood specimen is tested to determine blood type (ABO) or Rh(D). In Rh(D), blood is tested for Rh factor, which is an antigen on red blood cells. Blood is Rh+ if the antigen is present or Rh- if the antigen is absent. Blood is tested by mixing the blood sample with antibodies against Rh factor and then checking for agglutination. If agglutination occurs, the blood is Rh+. If the blood does not agglutinate, it is Rh-.

Blood unit compatibility test, immediate spin technique [CPT 86920]

A laboratory test is performed to determine the donor-recipient compatibility of a unit of blood. Compatibility testing may also be referred to as cross matching (CM). Immediate spin technique (ISCM) mixes recipient plasma or serum with donor red cells, centrifuges them immediately, and observes any hemolysis and/or agglutination. ISCM will not detect all ABO incompatibilities; however, a negative result indicates the blood of the donor and recipient are compatible and the unit may be transfused.

Coagulation function measurement, D-dimer; quantitative [CPT 85379]

D-dimer testing for fibrin degradation products is performed to help rule out the presence of a thrombus. D-dimer tests are also used to rule-out hypercoagulability. D-dimer has a negative predictive value for these conditions which means that a negative result indicates that there is not an elevated level of fibrin degradation products present in the specimen. A positive result indicates an abnormally high level of fibrin degradation products which may be indicative of a thrombus. It is used to help diagnosis deep vein thrombophlebitis, pulmonary embolus, and stroke. The test is also used to evaluate for hypercoagulability which predisposes the patient to blood clots and to help diagnose disseminated intravascular coagulation (DIC) and monitor the effectiveness of DIC treatment.

Creatine kinase (cardiac enzyme) level, MB fraction only [CPT 82553]

Creatine kinase (CK) also known as, creatine phosphokinase (CPK), is an enzyme found in the heart, brain, skeletal muscle and certain other tissue. The subtypes are known as CK-MM found primarily in skeletal and heart muscle, CK-MB found in heart muscle and CK-BB located in the brain. CK circulating in blood rarely contains CK-BB but is largely comprised of CK-MM or CK-MB. Levels may be elevated following heart muscle damage (heart attack/myocardial infarction) and skeletal muscle injury (trauma, vigorous exercise). Statin drugs that lower cholesterol level and alcohol intake may cause elevated CK blood levels. Only creatine kinase (CK) MB fraction is measured. Testing for this isoenzyme can help identify heart muscle damage following a heart attack (myocardial infarction). A blood test is obtained by separately reportable venipuncture. Serum is tested using chemiluminescent immunoassay.

Creatine kinase (cardiac enzyme) level, total [CPT 82550]

Creatine kinase (CK) also known as, creatine phosphokinase (CPK), is an enzyme found in the heart, brain, skeletal muscle and certain other tissue. The subtypes are known as CK-MM found primarily in skeletal and heart muscle, CK-MB found in heart muscle and CK-BB located in the brain. CK circulating in blood rarely contains CK-BB but is largely comprised of CK-MM or CK-MB. Levels may be elevated following heart muscle damage (heart attack/myocardial infarction) and skeletal muscle injury (trauma, vigorous exercise). Statin drugs that lower cholesterol level and alcohol intake may cause elevated CK blood levels. A blood test is performed to measure total creatine kinase (CK) levels. A blood specimen is obtained by separately reportable venipuncture. Serum or plasma is tested using quantitative enzymatic methodology.

Creatinine level to test for kidney function or muscle injury [CPT 82570]

A sample other than blood is taken to measure creatinine levels. Creatinine is a waste product produced by the muscles in the breakdown of creatine, which is a compound used by the muscles to create energy for contraction. The waste product, creatinine, is excreted by the kidneys and blood levels provide a good measurement of renal function. Creatinine may be checked to screen for or monitor treatment of renal disease. Creatinine levels may also be monitored in patients with acute or chronic illnesses that may impair renal function and in patients on medications that affect renal function. Creatinine clearance, also known as urea or urea nitrogen clearance tests both blood and urine samples for a calculation of creatinine content adjusted for urine volume and physical size as a general indicator of glomerular filtration function.

Detection test by nucleic acid for Staphylococcus aureus, methicillin resistant (MRSA bacteria), amplified probe technique [CPT 87641]

Detection test by nucleic acid for clostridium difficile, amplified probe technique [CPT 87493]

Digoxin level, total [CPT 80162]

A laboratory test is performed to measure digoxin levels. Digoxin, also known as Lanoxin, is a cardiac glycoside that controls sodium and potassium levels in the cells. Digoxin is primarily prescribed to treat atrial fibrillation, atrial flutter, and congestive heart failure. The drug increases the strength of cardiac muscle contractions which increases cardiac output and lowers the heart rate and venous pressure. Digoxin has a narrow therapeutic window but antidotal treatment is available (Digibind, Digoxin Immune FAB). The test for total digoxin measures Fab fragment-bound (inactive) digoxin and free (active) digoxin. This test is primarily used to monitor digoxin therapy and should be drawn 8-12 hours following an oral dose. The test for free digoxin (80163) may be used to evaluate breakthrough digoxin toxicity in patients with renal failure, access the need for additional antidigoxin Fab, determine when to reintroduce digoxin therapy, and monitor patients with possible digoxin-like immune reactive factors. To measure free digoxin, a blood sample is obtained by separately reportable venipuncture 6-8 hours after the last dose. Serum is tested for total digoxin using immunoassay and for free digoxin using ultrafiltration followed by electrochemiluminescent immunoassay.

Drug test def 1-7 classes [HCPCS G0480]

Evaluation of antimicrobial drug (antibiotic, antifungal, antiviral), microdilution or agar dilution [CPT 87186]

A study is performed to determine the effectiveness of a specific antibiotic agent to a specific bacteria. The test is performed in an agar solution.

Ferritin (blood protein) level [CPT 82728]

A blood test is performed to measure ferritin levels. Ferritin is an intracellular protein that stores iron and releases it into circulation in a controlled manner to protect the body against iron overload and iron deficiency. Ferritin levels may be obtained to evaluate for elevated levels caused by excess storage diseases such as hemochromatosis and following multiple transfusions. Levels may also be obtained to evaluate for decreased levels due to iron deficiency. A blood sample is obtained by separately reportable venipuncture. Serum is tested using quantitative chemiluminescent immunoassay.

Hemoglobin A1C level [CPT 83036]

A blood test is performed to measure glycosylated hemoglobin (HbA1C) levels. Plasma glucose binds to hemoglobin and the HbA1C test measures the average plasma glucose concentration over the life of red blood cells (approximately 90-120 days). HbA1C levels may be used as a diagnostic reference for patients with suspected diabetes mellitus (DM) and to monitor blood glucose control in patients with known DM. HbA1C levels should be monitored at least every 6 months in patients with DM and more frequently when the level is >7.0%. A blood sample is obtained by separately reportable venipuncture. Whole blood is tested using quantitative high performance liquid chromatography/boronate affinity.

Identification of organisms by immunologic analysis, other than immunofluorescence method [CPT 87147]

Iron binding capacity [CPT 83550]

A blood test is performed to measure the iron binding capacity of transferrin. Transferrin, a protein found in circulating blood is responsible for carrying iron molecules. This test measures the ability of transferrin to carry iron. A blood sample is obtained by separately reportable venipuncture. Serum or plasma is tested using quantitative spectrophotometry/calculation.

Iron level [CPT 83540]

A blood, urine or liver test is performed to measure iron levels. Iron (Fe) is an essential element that circulates in the blood attached to the protein transferrin. Iron is necessary component of hemoglobin, found in red blood cells (RBCs) and myoglobin found in muscle cells. Low iron levels may cause a decrease in red blood cells and iron deficiency anemia. High iron levels may be caused by excessive intake of iron supplements or a hereditary genetic condition such as hemochromatosis from a mutation of the RGMc gene or HAMP gene. A blood sample is obtained by separately reportable venipuncture. Serum or plasma is tested using quantitative spectrophotometry. A random voided or 24 hour urine specimen is obtained and tested using quantitative inductively coupled plasma/emission spectrometry. Patient should wait 2-4 days after receiving iodine or gadolinium contrast media to collect a urine specimen. A liver sample is obtained by a separately reportable procedure. Liver tissue is tested using quantitative inductively coupled plasma-mass spectrometry.

LDL cholesterol level [CPT 83721]

Lab test for LDL Cholesterol

Lactate dehydrogenase (enzyme) level [CPT 83615]

A blood or body fluid test is performed to measure lactate dehydrogenase (LD) (LDH) levels. LDH is an enzyme present in red blood cells (RBCs) and in the tissue of heart, liver, pancreas, kidney, skeletal muscle, brain and lungs. LDH levels are used as a marker for tissue and RBC damage. Elevated blood levels can be caused by stroke, myocardial infarction, liver disease, pancreatitis, muscular dystrophy, infectious mononucleosis, hemolytic anemia and tumors/cancers such as lymphoma. Elevated cerebral spinal fluid (CSF) levels are usually indicative of bacterial meningitis. LDH levels in pleural and/or pericardial fluid can indicate if the effusion is an exudate, caused by an infection or a transudate caused by fluid pressure problem. A blood sample is obtained by separately reportable venipuncture. Cerebral spinal fluid is obtained by separately reportable lumbar puncture (spinal tap). Pericardial fluid is obtained by separately reportable pericardiocentesis. Fluid from a pleural effusion is obtained by separately reportable thoracentesis. Serum or plasma and all body fluids are tested using quantitative enzymatic methodology.

Lactic acid level [CPT 83605]

A blood or body fluid test is performed to measure lactate (lactic acid) levels. Lactic acid is produced primarily by muscle tissue and red blood cells in the body. Elevated levels may be caused by strenuous exercise, heart failure, severe infection (sepsis), shock states (cardiogenic, hypovolemic) and liver disease. A blood sample is obtained by separately reportable venipuncture. Cerebral spinal fluid (CSF) is obtained by lumbar puncture (spinal tap). Other body fluids may also be collected and tested. Plasma, CSF, and other body fluids are tested using enzymatic methodology.

Lipase (fat enzyme) level [CPT 83690]

A test is performed on blood and body fluids to measure lipase levels. Lipase is an enzyme released by the pancreas into the small intestine and is essential for the digestion of dietary fats. Elevated levels may result from small bowel obstruction, celiac disease, cholecystitis, duodenal ulcer, severe gastroenteritis, macrolipasemia, pancreatitis, and pancreatic tumors. The test may be ordered when there is a family history of lipoprotein lipase deficiency. A blood sample is obtained by separately reportable venipuncture. Other body fluids collected by other methods. Blood and other body fluids are tested using quantitative enzymatic methodology.

Liver enzyme (SGPT), level [CPT 84460]

A blood test is performed to measure alanine aminotransferase (ALT) levels. This enzyme was previously referred to as serum glutamic pyruvic transaminase (SGPT). ALT is an enzyme found primarily in liver and muscle cells. Elevated levels may result from liver disease or damage such as hepatitis, cirrhosis, ischemia, drug toxicity, and/or muscle damage, especially cardiac muscle (myocardial infarction). This test is often ordered in conjunction with aspartate transferase, AST or other liver function tests (LFTs) to diagnose disease and monitor individuals taking cholesterol lowering medications. A blood sample is obtained by separately reportable venipuncture. Serum/plasma is tested using quantitative enzymatic method.

Magnesium level [CPT 83735]

A blood, urine, or fecal test is performed to measure magnesium levels. Magnesium is an essential dietary mineral responsible for enzyme function, energy production, and contraction and relaxation of muscle fibers. Decreased levels may result from severe burns, metabolic disorders, certain medications, and low blood calcium levels. A blood sample is obtained by separately reportable venipuncture. Red blood cells (RBCs) are tested using quantitative inductively coupled plasma-mass spectrometry. Serum/plasma is tested using quantitative spectrophotometry. A 24-hour voided urine specimen is tested using quantitative spectrophotometry. A random or 24-hour fecal sample is tested using quantitative spectrophotometry.

Measurement C-reactive protein for detection of infection or inflammation [CPT 86140]

A blood test is performed to measure C-reactive protein (CRP) levels. This standard test has a wide value range. CRP is an acute phase protein, synthesized by the liver and released in response to inflammation and infection. The test is not diagnostic for any specific disease or condition but can be used as a marker to monitor the body's response to treatment(s) or to evaluate the need for further testing. Elevation of CRP levels may be found during pregnancy, with the use of oral contraceptives, or hormone replacement therapy. Diseases/conditions that cause an elevation of CRP include: lymphoma, arteritis/vasculitis, osteomyelitis, inflammatory bowel disease, rheumatoid arthritis, pelvic inflammatory disease (PID), systemic lupus erythematosus (SLE), acute infections, burns, surgical procedures, and organ transplants. A blood sample is obtained by separately reportable venipuncture. Serum in neonates is tested using immunoassay. Serum/plasma in all other patients is tested using quantitative immunoturbidimetric method.

Measurement C-reactive protein for detection of infection or inflammation, high sensitivity [CPT 86141]

Lab test for High Sensitivity C-reactive protein

Natriuretic peptide (heart and blood vessel protein) level [CPT 83880]

The level of the natriuretic peptide in the blood is measured to evaluate heart failure and to differentiate symptoms that might be indicative of heart failure from other disorders that cause similar symptoms. A separately reportable venipuncture is performed and whole blood or plasma collected using EDTA as an anticoagulant. An automated immunoassay is performed using murine monoclonal and polyclonal antibodies against natriuretic peptide. The antibodies are labeled with a fluorescent dye and immobilized on the solid phase. The specimen is placed in the sample chamber and the analysis is run. The physician reviews the results and uses them to make diagnosis and treatment decisions.

Pathology examination of tissue using a microscope, intermediate complexity [CPT 88305]

Tissue removed during a surgical procedure, such as a biopsy, excision, or resection, is examined macroscopically (gross or visual examination) and then under a microscope. The cells, tissues, or organ are transported from the surgical suite to the pathologist. The pathologist first visually examines the specimen and notes any defining characteristics. The specimen is then prepared for microscopic evaluation. The physician carefully analyzes the specimens to help establish a diagnosis, identify the presence or absence of malignant neoplasm, identify the exact type malignancy if present, examine the margins of the specimen to determine whether or not the entire diseased area was removed. A written report of findings is then prepared and a copy sent to the treating physician. Pathology services are reported based on the type of tissue examined, whether or not the tissue is expected to be normal or diseased, the difficulty of the pathology exam, and the time required to complete the exam.

Phosphate level [CPT 84100]

A blood or urine test is performed to measure inorganic phosphorus (phosphate) levels. Phosphate is an intracellular anion, found primarily in bone and soft tissue. It plays an important role in cellular energy (nerve and muscle function) and the building/repair of bone and teeth. Decreased levels are most often caused by malnutrition and lead to muscle and neurological dysfunction. Elevated levels may be due to kidney or parathyroid gland problems. A blood sample is obtained by separately reportable venipuncture. Serum/plasma is tested using quantitative spectrophotometry.

Procalcitonin (hormone) level [CPT 84145]

Psa screening [HCPCS G0103]

Prostate cancer screening; prostate specific antigen test (psa)

Rbc leukocytes reduced [HCPCS P9016]

Red blood cells, leukocytes reduced, each unit

Red blood cell concentration measurement [CPT 85014]

A blood test is performed to determine hematocrit (Hct). Hematocrit refers to the volume of red blood cells (erythrocytes) in a given volume of blood and is usually expressed as a percentage of total blood volume. A blood sample is obtained by separately reportable venipuncture or finger, heel, or ear stick. Hct is calculated using an electronic cell counter.

Red blood cell sedimentation rate, to detect inflammation, non-automated [CPT 85651]

Lab test for Sedimentation rate

Screening test for red blood cell antibodies [CPT 86850]

A blood sample is tested for antibodies directed against red blood cell (RBC) antigens other than A and B antigens. This test may also be referred to as an indirect antiglobulin test (IAT). This test is performed as part of a blood typing and screening test when it is anticipated that a blood transfusion might be required. If an antibody is detected, then separately reportable antibody identification is performed to identify the specific antibodies present. The test may be performed using IAT methodology or another serum technique such as solid phase. If multiple serum techniques are used, each reported separately.

Special Gram or Giemsa stain for microorganism [CPT 87205]

A laboratory test is performed to identify bacteria, fungi, or cell types in pus, normally sterile body fluid(s), or aspirated material using Gram or Giemsa stain technique. Gram staining is a differential technique used to classify bacteria into gram positive (Gram +) or gram negative (Gram -) groups. Gram + bacteria have a thick layer of peptidoglycan in the cell wall which stains purple. Giemsa technique is used in cytogenetics for chromosome staining; in histopathology to detect trichomonas, some spirochetes, protozoans, malaria, and other parasites; and as a stain for peripheral blood and bone marrow to differentiate cells types such as erythrocytes, platelets, lymphocyte cytoplasm, monocyte cytoplasm, and leukocyte nuclear chromatin. A drop of suspended culture or cell material is applied in a thin layer to a slide using an inoculation hook and fixed with heat. The material is stained and the slide is examined under a microscope. The bacteria, fungi, or cells are identified, counted, and a written report of the findings is made.

Special stained specimen slides to examine tissue, each additional procedure [CPT 88341]

Special stained specimen slides to examine tissue, initial procedure [CPT 88342]

Immunohistochemistry or immunocytochemistry identifies a certain antigen by using an antibody specific to that antigen when examining cells contained in a specimen such as a tissue block, brushed cell samples, blood smear, or fine needle biopsy (FNB). The specimen is prepped for histological or cytological examination on a glass slide that has been fixed with a commercially available antibody. Enzymes and/or special stains are then applied to the specimen slide. The characteristic changes to the cells in the sample can help determine the antigenic profile of morphologically undifferentiated cells, and aid in the diagnosis of malignant neoplasms. The prepped slide specimen may be used to identify a single antibody or multiple antibodies.

Special stained specimen slides to identify organisms including interpretation and report [CPT 88312]

Testing for presence of drug, by chemistry analyzers [CPT 80307]

A laboratory test is performed to detect the presence or absence of drugs classes in a patient’s system during a specific encounter. Presumptive screening is commonly done first, followed by test(s) for definitive drug identification as presumptive testing will not provide qualitative identification of individual drugs, nor quantitative levels present. A sample of blood or urine is obtained by separately reported procedure. Methods used include immunoassays, chromatography, and mass spectrometry.

Thyroxine (thyroid chemical), free [CPT 84439]

A blood sample is obtained and levels of total thyroxin, thyroxine requiring elution as for testing in neonates or free thyroxine are evaluated. Thyroxine, also referred to as T4, is tested to determine whether the thyroid is functioning properly and is used to aid in the diagnosis of overactive (hyperthyroidism) or underactive (hypothyroidism) thyroid function. In free thyroxine levels are tested. Free thyroxine is the amount of active thyroxine in the blood. Free thyroxine levels are considered to be a more accurate indicator of thyroid function. All thyroxine tests use electrochemiluminescent immunoassay methodology.

Total protein level, urine [CPT 84156]

A urine test is performed to measure total protein levels. Protein is not normally found in urine and usually indicates damage or disease in the kidneys. Elevated levels are often present in patients with diabetes, hypertension, and multiple myeloma. A 24-hour or random urine sample is obtained and tested using quantitative spectrophotometry.

Triglycerides level [CPT 84478]

A test is performed on blood or body fluids to measure triglyceride levels. Triglycerides contain glycerol and 3 fatty acid molecules and are a component of very low density lipoproteins (VLDL) found in blood and chylomicrons (cholesterol, protein, triglycerides) found in lymphatic fluid. They provide an energy source during metabolism and carry any unused dietary fats or calories to the liver and fat cells where they can be stored. Elevated levels may reflect recent carbohydrate and/or fat consumption. Blood samples should be obtained with the patient fasting for 12 hours. A blood sample is obtained by separately reportable venipuncture. Body (lymphatic) fluid is obtained by needle aspiration or incision/drainage of pooled fluid. Serum/plasma and body fluids are tested using quantitative enzymatic methods.

Troponin (protein) analysis, quantitative [CPT 84484]

A blood test is performed to measure troponin levels. Troponins are regulatory proteins that facilitate contraction of skeletal and smooth muscle by forming calcium bonds. Troponin T binds to tropomyosin to form a complex. Troponin I binds to actin and holds the Troponin T-tropomyosin complex together. Elevation of troponins, coupled with cardiac symptoms such as chest pain are considered diagnostic for cardiac injury. This test is commonly ordered in the Emergency Department when a patient presents with possible myocardial infarction, and is then repeated at 6 hour intervals. It may be ordered with other tests that assess cardiac biomarkers such as CK, CK-MB, and myoglobin. A blood sample is obtained by separately reportable venipuncture. Serum/plasma is tested for Troponin T using quantitative electrochemiluminescent immunoassay. Serum is tested for Troponin I using chemiluminescent immunoassay.

Urea nitrogen level to assess kidney function, quantitative [CPT 84520]

A blood sample is obtained to measure total (quantitative) urea nitrogen (BUN) level. Urea is a waste product produced in the liver by the breakdown of protein from a sequence of chemical reactions referred to as the urea or Krebs-Henseleit cycle. Urea then enters the bloodstream, is taken up by the kidneys and excreted in the urine. Blood BUN is measured to evaluate renal function, to monitor patients with renal disease, and to evaluate effectiveness of dialysis. BUN may also be measured in patients with acute or chronic illnesses that affect renal function. BUN is measured using spectrophotometry.

Vitamin D-3 level [CPT 82306]

Blood levels of 25-hydroxyvitamin D are used to primarily to determine whether a deficiency of Vitamin D or abnormal metabolism of calcium is the cause of bone weakness or malformation. Vitamin D is a fat soluble vitamin that is absorbed from the intestine like fat, and 25-hydroxyvitamin D levels are also evaluated in individuals with conditions or diseases that interfere with fat absorption, such as cystic fibrosis, Crohn's disease, or in patients who have undergone gastric bypass surgery. A blood sample is obtained. Levels of 25-hydroxyvitamin D3 and 25-hydroxyvitamin D2 are evaluated using chemiluminescent immunoassay. The test results may be the sum of Vitamin D3 and D2 or the results may include fractions of D3 and D2 as well as the sum of these values.

Abatacept injection [HCPCS J0129]

Adenosine inj 1mg [HCPCS J0153]

Admin influenza virus vac [HCPCS G0008]

Administration of influenza virus vaccine

Admin pneumococcal vaccine [HCPCS G0009]

Administration of pneumococcal vaccine

Administration of 1 vaccine [CPT 90471]

A single vaccine or a combination vaccine/toxoid is administered by injection to a patient over age 18 with or without a face-to-face encounter with the physician or other health care professional. These codes are also used when a vaccine/toxoid is given to a patient age 18 or younger without any face-to-face counseling by the physician or other health care professional. Routes of administration include percutaneous, intradermal, subcutaneous, or intramuscular.

Alteplase recombinant [HCPCS J2997]

Atropine sulfate injection [HCPCS J0461]

Cefazolin sodium injection [HCPCS J0690]

Injection, cefazolin sodium, 500 mg

Ceftriaxone sodium injection [HCPCS J0696]

Injection, ceftriaxone sodium, per 250 mg

Daptomycin injection [HCPCS J0878]

Degarelix injection [HCPCS J9155]

Dexamethasone sodium phos [HCPCS J1100]

Injection, dexamethasone sodium phosphate, 1mg

Diphenhydramine hcl injectio [HCPCS J1200]

Injection, diphenhydramine hcl, up to 50 mg

Drugs unclassified injection [HCPCS J3490]

Epoetin alfa, non-esrd [HCPCS J0885]

Fentanyl citrate injection [HCPCS J3010]

Injection, fentanyl citrate, 0.1 mg

Ferumoxytol, non-esrd [HCPCS Q0138]

Golimumab for iv use 1mg [HCPCS J1602]

Infliximab not biosimil 10mg [HCPCS J1745]

Infusion of chemotherapy into a vein up to 1 hour [CPT 96413]

An intravenous infusion of a chemotherapy substance or drug is administered for treatment of a malignant neoplasm. An intravenous line is placed into a vein, usually in the arm, and the specified chemotherapy agent is administered. The physician provides direct supervision of the administration of the chemotherapy agent and is immediately available to intervene should complications arise. The physician provides periodic assessments of the patient and documentation of the patient's response to treatment.

Inj enoxaparin sodium [HCPCS J1650]

Injection, enoxaparin sodium, 10 mg

Inj ferric carboxymaltos 1mg [HCPCS J1439]

Inj midazolam hydrochloride [HCPCS J2250]

Injection, midazolam hydrochloride, per 1 mg

Injection of different drug or substance into a vein for therapy, diagnosis, or prevention [CPT 96375]

A therapeutic, prophylactic, or diagnostic injection is administered by intravenous push (IVP) technique. The specified substance or drug is injected using a syringe directly into an injection site of an existing intravenous line or intermittent infusion set (saline lock). The injection is given over a short period of time, usually less than 15 minutes.

Injection of drug or substance into a vein for therapy, diagnosis, or prevention [CPT 96374]

A therapeutic, prophylactic, or diagnostic injection is administered by intravenous push (IVP) technique. The specified substance or drug is injected using a syringe directly into an injection site of an existing intravenous line or intermittent infusion set (saline lock). The injection is given over a short period of time, usually less than 15 minutes.

Injection, infliximab-dyyb, biosimilar, (inflectra), 10 mg

Injection, vedolizumab [HCPCS J3380]

Ketorolac tromethamine inj [HCPCS J1885]

Injection, ketorolac tromethamine, per 15 mg

Lidocaine injection [HCPCS J2001]

Lorazepam injection [HCPCS J2060]

Injection, lorazepam, 2 mg

Morphine sulfate injection [HCPCS J2270]

Injection, morphine sulfate, up to 10 mg

Octreotide injection, depot [HCPCS J2353]

Omalizumab injection [HCPCS J2357]

Ondansetron hcl injection [HCPCS J2405]

Injection, ondansetron hydrochloride, per 1 mg

Piperacillin/tazobactam [HCPCS J2543]

Injection, piperacillin sodium/tazobactam sodium, 1 gram/0.125 grams (1.125 grams)

Regadenoson injection [HCPCS J2785]

Ringers lactate infusion [HCPCS J7120]

Tenecteplase injection [HCPCS J3101]

Ustekinumab sub cu inj, 1 mg [HCPCS J3357]

Vaccine for tetanus, diphtheria toxoids and acellular pertussis (whooping cough) for injection into muscle, patient 7 years or older [CPT 90715]

Toxoids provide long lasting immunity by stimulating the body's own defense system to make antibodies that destroy specific toxins produced by bacteria. Vaccines also provide active, long-term immunity by exposing the recipient's immune system to altered versions of specific viruses or bacteria that induce the immune system to produce its own antibodies against the invading micro-organism. The body then remembers how to make antibodies when exposed to these same agents again. The toxoid vaccine is an inactivated poison, called a toxin, produced by culturing the bacteria in a liquid medium, then purifying and inactivating the poison produced by the bacteria. Since toxoids are not a live vaccine, booster doses are recommended because immunity will decline over time. These tetanus toxoid combinations are formulations for adults and those over 7 years of age, given by intramuscular injection.

Application of hot wax bath to 1 or more areas [CPT 97018]

A paraffin bath may be used on small, irregular surfaces such as the wrists, hands, and feet to treat acute or chronic pain and stiffness. Paraffin is a mineral wax derived from petroleum with a low melting point, which allows extended contact with the skin without the risk of thermal injury. Paraffin is melted in a small tub and the extremity is immersed in the liquid. The moist heat from the wax increases blood flow to the area and relaxes muscle tissue. Paraffin bath treatments may be used prior to exercise to reduce joint stiffness and increase range of motion. This treatment modality is helpful for patients with osteoarthritis, rheumatoid conditions, fibromyalgia, and scleroderma. Paraffin baths may also be prescribed for bursitis, tendonitis, and muscle sprains or strains.

Elec stim other than wound [HCPCS G0283]

Electrical stimulation (unattended), to one or more areas for indication(s) other than wound care, as part of a therapy plan of care

Evaluation of occupational therapy, typically 45 minutes [CPT 97166]

An occupational therapy evaluation or re-evaluation is performed. Occupational therapy assists the patient in developing or regaining skills that allow independent functioning and enhance health and personal well-being. A patient history is taken that includes an occupational profile and medical and therapy history with review of records as well as an extensive review of physical, cognitive, or psychosocial elements related to current performance of daily activities. The occupational therapist evaluates the patient's physical functioning, mental, and/or neurobehavioral impairment and performs tests to identify functional limitations or performance deficits. Physical functioning is evaluated, including an evaluation of any musculoskeletal conditions that may impair function. The ability to perform basic activities of daily living such as dressing, bathing, mobility, and other activities for living independently, such as shopping, cooking, driving, or accessing public transportation are all assessed. Barriers in the home, school, work, and community environments are identified. The need for adaptive equipment is assessed. The occupational therapist develops a treatment plan using clinical decision making from the patient analysis, assessment data, comorbidities, and possible treatment options. During a re-evaluation, an interim history is taken; the patient's response to treatment is evaluated; and the plan of care is revised based on the patient's response to treatment, functional and medical status, and any changes in condition or environment that affect future interventions or goals.

Evaluation of physical therapy, typically 30 minutes [CPT 97162]

A physical therapy evaluation or re-evaluation is performed. The physical therapist takes a history of the current complaint including onset of symptoms, comorbidities, changes since the onset, treatment received for the symptoms or condition, medications prescribed for it, and any other medications the patient is taking. A physical examination of body systems is done to assess physical structure and function, any activities or movements that exacerbate the symptoms, limit activity, or restrict participation in movement, as well as anything that helps to relieve the symptoms. The evaluation may involve provocative maneuvers or positions that increase symptoms; tests for joint flexibility and muscle strength; assessments of general mobility, posture, and core strength; evaluation of muscle tone; and tests for restrictions of movement caused by myofascial disorders. Following the history and physical, the therapist determines the patient's clinical presentation characteristics, provides a detailed explanation of the condition, identifies physical therapy treatment options, and explains how often and how long physical therapy modalities should be applied. The physical therapist will then develop a plan of care with clinical decision making based on patient assessment and/or measurable functional outcome. The plan of care may include both physical therapy in the clinic and exercises or changes in the home environment. Upon re-evaluation, the established care plan is reviewed and an interim history is taken requiring the use of standardized tests and measures. The patient's response to treatment is evaluated and the plan of care is revised based on the patient's measurable response.

Evaluation of physical therapy, typically 45 minutes [CPT 97163]

A physical therapy evaluation or re-evaluation is performed. The physical therapist takes a history of the current complaint including onset of symptoms, comorbidities, changes since the onset, treatment received for the symptoms or condition, medications prescribed for it, and any other medications the patient is taking. A physical examination of body systems is done to assess physical structure and function, any activities or movements that exacerbate the symptoms, limit activity, or restrict participation in movement, as well as anything that helps to relieve the symptoms. The evaluation may involve provocative maneuvers or positions that increase symptoms; tests for joint flexibility and muscle strength; assessments of general mobility, posture, and core strength; evaluation of muscle tone; and tests for restrictions of movement caused by myofascial disorders. Following the history and physical, the therapist determines the patient's clinical presentation characteristics, provides a detailed explanation of the condition, identifies physical therapy treatment options, and explains how often and how long physical therapy modalities should be applied. The physical therapist will then develop a plan of care with clinical decision making based on patient assessment and/or measurable functional outcome. The plan of care may include both physical therapy in the clinic and exercises or changes in the home environment. Upon re-evaluation, the established care plan is reviewed and an interim history is taken requiring the use of standardized tests and measures. The patient's response to treatment is evaluated and the plan of care is revised based on the patient's measurable response.

Manual (physical) therapy techniques to 1 or more regions, each 15 minutes [CPT 97140]

Manual therapies are skilled, specific, hands-on techniques usually performed by physical therapists, occupational therapists, chiropractors, osteopaths, and/or physiatrists to diagnose and treat soft tissue and joint problems. The goal of manual therapy is to modulate pain and induce relaxation, increase range of motion (ROM), facilitate movement, function, and stability, decrease inflammation, and improve muscle tone and extensibility. Tissue mobilization involves slow, controlled myofascial stretching using deep pressure to break up fibrous muscle tissue and/or connective tissue adhesions. Manipulation is a more forceful stretching of the myofascial tissue that takes the joint just beyond its restricted barrier. Manual lymphatic drainage is a type of light massage employed to reduce swelling by gentle movement of the skin in the direction of lymphatic flow. Manual traction involves the controlled counterforce of the therapist to induce asymptomatic strain by gently stretching muscle and/or connective tissue.

Therapeutic activities to improve function, with one-on-one contact between patient and provider, each 15 minutes [CPT 97530]

In a one-on-one physical therapy session, the provider instructs and assists the patient in therapeutic activities designed to address specific functional limitations. The therapeutic activities are specifically developed and modified for the patient. Dynamic/movement activities, also called kinetic activities, that are designed to improve functional performance such as lifting, bending, pushing, pulling, jumping and reaching are included in this service. For example, the patient may be given therapeutic activities to perform to improve the ability to sit, stand, and get out of bed after an injury without straining or risking reinjury. This code is reported for each 15 minutes of one-on-one therapeutic activity provided.

Therapeutic procedure to re-educate brain-to-nerve-to-muscle function, each 15 minutes [CPT 97112]

Therapeutic procedures for neuromuscular reeducation are used to develop conscious control of a single muscle or muscle group and heighten the awareness of the body's position in space, especially the position of the extremities when sitting or standing. Neuromuscular reeducation is employed during the recovery or regeneration stage following severe injury or trauma, cerebral vascular accident, or systemic neurological disease. The goal of therapy is improved range of motion (ROM), balance, coordination, posture, and spatial awareness. Techniques may include proprioceptive neuromuscular facilitation which uses diagonal contract-relax patterns of skeletal muscles to stimulate receptors in the joints that communicate body position to the brain via motor and sensory nerves. Feldenkrais is a method which observes the patient's habitual movement patterns and teaches new patterns based on efficient active or passive repetitive conditioning. Additional techniques that may be useful for neuromuscular reeducation are Bobath concept, which promotes motor learning and efficient motor control, and biomechanical ankle platform system (BAPS) boards.

Treatment of speech, language, voice, communication, and/or hearing processing disorder [CPT 92507]

A speech-language pathologist treats a speech, language, voice, communication, and/or auditory processing disorder. Using the information obtained from a separately reportable screening and in-depth evaluation of a speech or language disorder, the clinician develops an individualized treatment plan for the patient. The clinician defines specific treatment goals and sets baseline measures with which to assess the patient's progress. These goals are continuously monitored and fine-tuned throughout the treatment period. Once the goals and baseline measures have been established the clinician uses a number of intervention activities to correct the specific speech or language disorder identified. These can include games, stories, rhymes, drills, and other tasks. If the patient has a speech disorder, the clinician may demonstrate the sounds and have the patient copy the way the clinician moves the lips, mouth, and tongue to make the right sound. A mirror may be used so that the patient can practice making the sound while observing himself or herself in the mirror. Treatment of a language disorder might include help with grammar. If the patient is having difficulty with auditory processing, a game like Simon Says might be used to help improve understanding of verbal instructions.

Treatment of swallowing and/or oral feeding function [CPT 92526]

Swallowing dysfunction and/or oral function are treated in an individual with difficulty passing food or liquid from the mouth or throat into the stomach. A swallowing or oral function disorder can occur in any age group or at any point in the swallowing process as food or liquid passes from the mouth, through the pharynx and esophagus, into the stomach. Swallowing disorders are common in individuals with degenerative neurological disorders such as cerebral palsy, amyotrophic lateral sclerosis (ALS), postpolio syndrome, myasthenia gravis, multiple sclerosis, and Parkinson's disease. A swallowing disorder may also result from neurological damage such as a stroke or head or spinal cord injury, or from a congenital or acquired deformity of the mouth, pharynx, esophagus, or stomach. Medical treatment is provided for a patient with a swallowing or oral function disorder. The diet is modified. Swallowing posture is assessed and modified as needed. Swallowing technique is modified to strengthen oropharyngeal muscle groups and improve the mechanics of swallowing so that food and liquid can pass into the esophagus and then into the stomach without aspiration into the lungs.

Walking training to 1 or more areas, each 15 minutes [CPT 97116]

Gait training is a therapeutic procedure that observes and educates an individual in the manner of walking including the rhythm, cadence, step, stride, and speed. The objective of gait training is to strengthen muscles and joints, improve balance and posture, and develop muscle memory. As the lower extremities are retrained for repetitive motion, the body also benefits from the exercise with increased endurance, improved heart/lung function, and reduced or improved osteoporosis. Gait training is an appropriate therapeutic procedure following brain and/or spinal cord injury, stroke, fracture of the pelvis and/or lower extremity, joint injury or replacement of the knee, hip, or ankle, amputation, and for certain musculoskeletal and/or neurological diseases. A treadmill fitted with a safety harness is initially used to ensure safe walking. As the patient gains strength and balance, step training and stair climbing is added to the treatment modality.

Demonstration and/or evaluation of patient use of aerosol generator, nebulizer, metered dose inhaler or intermittent positive pressure breathing (IPPB) device [CPT 94664]

A patient or caregiver receives a demonstration of and training in the use of an aerosol generator, nebulizer, metered dose inhaler, or IPPB device. The effectiveness of inhaled medications is in part dependent on the proficiency of the patient or a caregiver in using the prescribed device. The delivery device is selected based on the type of medication being administered and the ability of the patient or caregiver to master use of the device. The provider, usually a respiratory therapist, demonstrates use of the device and explains in detail why and how the medication and device must be used for maximum effectiveness. The patient or caregiver is then observed as he/she uses the device. The respiratory therapist offers help and clarification on the use of the device as needed. Correct use of the device may require more than one demonstration and training session.

Exercise or drug-induced heart and blood vessel stress test with EKG tracing and monitoring [CPT 93017]

An ECG is used to evaluate the electrical activity of the heart using treadmill, bicycle exercise, and/or pharmacologically induced stress. Small plastic patches are attached at specific locations on the chest, abdomen, arms, and/or legs. Leads (wires) from the stress ECG device are then attached to the patches. A baseline ECG is obtained. The exercise portion of the study is then initiated. Heart rate and blood pressure are monitored. Staged stress protocol is used and the patient's response to stress is monitored as the stress ECG is recorded. Unless contraindicated, exercise or pharmacological stress continues until the patient is unable to continue or until the target heart rate is achieved. Upon completion of the study, the stress ECG is reviewed and a written interpretation of findings is provided.

Heart rhythm tracing of 48-hour EKG [CPT 93225]

Electrocardiographic (ECG) rhythm-derived data is gathered for up to 48 hours of monitoring as the patient goes about regular daily activity while wearing an external ECG recording device, also called a Holter monitor. Electrodes or leads are placed on the patient's chest, and the patient is instructed on the use of the monitor. The recording device makes continuous, original ECG wave recordings for a 12 to 48 hour period. The recordings are captured on magnetic tape or digitized medium to be reviewed later. At the end of the recording period, the patient returns to the office with the device. Stored data derived from the continuous recordings of the electrical activity of the heart include heart rhythm and rate, ST analysis, variability in heart rate and T-wave alternans. Visual superimposition scanning is done to give a 'page review' of the entire recording, identifying different ECG waveforms with selective samples of rhythm strips. A report is made after analysis of the scanning, and the physician or other qualified health care professional reviews and interprets the data for heart arrhythmias.

Measurement and graphic recording of the amount and speed of breathed air, before and following medication administration [CPT 94060]

Spirometry with bronchodilation responsiveness is a pulmonary function test that is used to help diagnose the cause of shortness of breath and to monitor existing pulmonary disease, such as chronic bronchitis, emphysema, pulmonary fibrosis, chronic obstructive pulmonary disease (COPD), and asthma. The test is first performed without administration of a bronchodilator. A spirometry device consisting of a mouthpiece and tubing connected to a machine that records and displays results is used to perform the test. The patient inhales deeply and then exhales through the mouthpiece. Inhalation and exhalation measurements are first taken with the patient breathing normally. The patient is then instructed to perform rapid, forceful inhalation and exhalation. The spirometer records the volume of air inhaled, exhaled, and the length of time each breath takes. A bronchodilator medication is administered and the test is repeated. The test results are displayed on a graph that the physician reviews and interprets in a written report.

Pulmonary rehab w exer [HCPCS G0424]

Routine electrocardiogram (EKG) with tracing using at least 12 leads [CPT 93005]

An ECG is used to evaluate the electrical activity of the heart. The test is performed with the patient lying prone on the exam table. Small plastic patches are attached at specific locations on the chest, abdomen, arms, and/or legs. Leads (wires) from the ECG tracing device are then attached to the patches. A tracing is obtained of the electrical signals from the heart. Electrical activity begins in the sinoatrial node which generates an electrical stimulus at regular intervals, usually 60 to 100 times per minute. This stimulus travels through the conduction pathways to the sinoatrial node causing the atria to contract. The stimulus then travels along the bundle of His which divides into right and left pathways providing electrical stimulation of the ventricles causing them to contract. Each contraction of the ventricles represents one heart beat. The ECG tracing includes the following elements: P wave, QRS complex, ST segment, and T wave. The P wave, a small upward notch in the tracing, indicates electrical stimulation of the atria. This is followed by the QRS complex which indicates the ventricles are electrically stimulated to contract. The short flat ST segment follows and indicates the time between the end of the ventricular contraction and the T wave. The T wave represents the recovery period of the ventricles. The physician reviews, interprets, and provides a written report of the ECG recording taking care to note any abnormalities.

Determination of lung volumes using plethysmography [CPT 94726]

Lung volume plethysmography is performed to determine the maximum volume of air that the lungs can hold. The test is performed in a small airtight room called a body box. Clips are placed on the nose to prevent air from entering the nostrils. The patient then breathes and/or pants into a mouthpiece that is in an open position. If airway resistance is measured, the patient then breathes and/or pants into a closed mouthpiece. As the chest moves during breathing or panting, the pressure and amount of air in the room and against the mouthpiece is measured. Changes in these variables allow the physician to measure lung volume with an open mouthpiece and airway resistance with a closed mouthpiece. The physician analyzes the test results and provides a written report of findings.

Measurement of lung diffusing capacity [CPT 94729]

The diffusing capacity of the lungs using carbon monoxide (CO) measures the ability of the lungs to transfer gas from inhaled air across the alveolar-capillary membrane to the red blood cells. This test is performed in conjunction with other separately reportable pulmonary function tests to determine whether lung restriction is due to parenchymal (intrapulmonary, interstitial) disease or to decreased cardiac output (extrapulmonary). The patient breathes all the way out. The patient then breathes in through the mouthpiece of the diffusion capacity testing device which delivers a gas mixture containing 0.3 percent CO, 10 percent Helium, 21 percent oxygen and 68.7 percent nitrogen. When total lung capacity is reached, the patient holds his/her breath for 10 seconds. The patient then breathes out, expelling the gas that has been in the dead space (mouth, trachea, and two main bronchi), which is discarded. The remainder of the gas is exhaled and collected. The amount of the various exhaled gases in the sample is then analyzed and diffusing capacity is evaluated. The physician reviews the test results and provides a written report of findings.

Respiratory inhaled pressure or nonpressure treatment to relieve airway obstruction or for sputum specimen [CPT 94640]

The patient is placed on intermittent inhalation treatment for acute airway obstruction or to induce sputum production for therapeutic and/or diagnostic purposes. To treat acute airway obstruction, pressurized or nonpressurized bronchodilator medication is delivered for short intervals several times a day using an inhaler, nebulizer, aerosol generator, or an intermittent positive pressure breathing (IPPB) device. Bronchodilator medication is suspended as fine particles within a gaseous propellant and taken into the lungs as a fine spray. The medication acts to relax the smooth muscle of the bronchioles and lung tissue, which has constricted in conditions such as an asthma attack or hypersensitivity reaction, severely restricting air flow. The patient uses the prescribed pressurized or nonpressurized inhalation device as directed by the physician typically for 10-15 minutes several times during the day. To induce sputum production for diagnostic purposes, an isotonic or hypertonic solution is delivered using a nebulizer or other device. These solutions induct secretion of sputum in the lower airways. The patient must cough to expectorate the secretions which are collected in a sterile container and sent to the laboratory for separately reportable analysis.

Bone and/or joint imaging, whole body [CPT 78306]

Bone and/or joint imaging using scintigraphy and a radiolabeled isotope tracer may be performed on patients who have unexplained skeletal pain suggestive of bone loss, infection, inflammation, or injury and traditional radiographics (planar x-rays) have failed to provide a diagnosis. An intravenous line is established and the radiolabeled isotope tracer is injected directly into the circulatory system. When inflammation is suspected, a blood sample is drawn and centrifuged to separate white blood cells (WBCs), which are then tagged with radioactive calcium and injected back into the patient. After a prescribed period of time, the patient is positioned on the imaging table with the gamma camera over the body. Scanning is performed at specific intervals and the radioactive energy emitted is converted into an image. The physician interprets the bone and/or joint imaging study and provides a written report of the findings.

CT scan abdomen before and after contrast [CPT 74170]

Diagnostic computed tomography (CT) is done on the abdomen to provide detailed visualization of the tissues and organs within the abdominal area. CT uses multiple, narrow x-ray beams aimed around a single rotational axis, taking a series of 2D images of the target structure from multiple angles. Contrast material is used to enhance the images. Computer software processes the data and produces several images of thin, cross-sectional 2D slices of the targeted organ or area. Three-dimensional models can be created by stacking multiple, individual 2D slices together. The patient is placed inside the CT scanner on the table and images are obtained of the abdomen. The physician reviews the images for the cause of abdominal pain, swelling, and fever; for other suspected problems such as appendicitis and kidney stones; for locating tumors, abscesses, or masses; or for evaluating the abdominal area for hernias, infections, or internal injury. The physician reviews the CT scan, notes any abnormalities, and provides a written interpretation of the findings.

CT scan leg [CPT 73700]

Diagnostic computed tomography (CT) is done on the lower extremity to provide detailed visualization of the tissues and bone structure of the leg. CT uses multiple, narrow x-ray beams aimed around a single rotational axis, taking a series of 2D images of the target structure from multiple angles. Contrast material is used to enhance the images. Computer software processes the data and produces several images of thin, cross-sectional 2D slices of the targeted organ or area. Three-dimensional models of the leg can be created by stacking multiple, individual 2D slices together. The patient is placed inside the CT scanner on the table and images are obtained of the lower extremity.

CT scan of abdomen and pelvis before and after contrast [CPT 74178]

Computerized tomography, also referred to as a CT scan, uses special x-ray equipment and computer technology to produce multiple cross-sectional images of the abdomen and pelvis. The patient is positioned on the CT examination table. An initial pass is made through the CT scanner to determine the starting position of the scans. The CT scan is then performed. As the table moves slowly through the scanner, numerous x-ray beams and electronic x-ray detectors rotate around the abdomen and pelvis. The amount of radiation being absorbed is measured. As the beams and detectors rotate around the body, the table is moved through the scanner. A computer program processes the data which is then displayed on the monitor as two-dimensional cross-sectional images of the abdomen or pelvis. The physician reviews the data and images as they are obtained and may request additional sections to provide more detail on areas of interest.

CT scan of blood vessel of head with contrast [CPT 70496]

A computed tomographic angiography (CTA) of the head is performed with contrast material including image postprocessing. Noncontrast images may also be obtained and are included when performed. CTA provides images of the blood vessels using a combination of computed tomography (CT) and angiography with contrast material. When angiography is performed using CT, multiple images are obtained and processed on a computer to create detailed, two-dimensional, cross-sectional views of the blood vessels. These images are then displayed on a computer monitor. The patient is positioned on the CT table. An intravenous line is inserted into a blood vessel, usually in the arm or hand. Non-contrast images may be obtained. A small dose of contrast is injected and test images are obtained to verify correct positioning. The CTA is then performed. Contrast is injected at a controlled rate and the CT table moves through the CT machine as the scanning is performed. After completion of the CTA, the radiologist reviews and interprets the CTA images of the head.

CT scan of blood vessels in chest with contrast [CPT 71275]

A computed tomographic angiography (CTA) of the noncoronary vessels of the chest is performed with contrast material including image postprocessing. Noncontrast images may also be obtained and are included when performed. CTA provides images of the blood vessels using a combination of computed tomography (CT) and angiography with contrast material. When angiography is performed using CT, multiple images are obtained and processed on a computer to create detailed, two-dimensional, cross-sectional views of the blood vessels. These images are then displayed on a computer monitor. The patient is positioned on the CT table. An intravenous line is inserted into a blood vessel, usually in the arm or hand. Non-contrast images may be obtained. A small dose of contrast is injected and test images are obtained to verify correct positioning. The CTA is then performed. Contrast is injected at a controlled rate and the CT table moves through the CT machine as the scanning is performed. After completion of the CTA, the radiologist reviews and interprets the CTA images of the noncoronary vessels of the chest.

CT scan of face [CPT 70486]

Computerized tomography, also referred to as a CT scan, uses special x-ray equipment and computer technology to produce multiple cross-sectional images of the region being studied. In this study, CT scan of the maxillofacial area is obtained. The maxillofacial area includes the forehead (frontal bone), sinuses, nose and nasal bones, jaw (maxilla and mandible). The only facial region not included in this study is the orbit. The patient is positioned on the CT examination table. An initial pass is made through the CT scanner to determine the starting position of the scans, after which the CT scan is performed. As the table moves slowly through the scanner, numerous x-ray beams and electronic x-ray detectors rotate around the body region being examined. The amount of radiation being absorbed is measured. As the beams and detectors rotate around the body, the table is moved through the scanner. A computer program processes the data and renders the data in two-dimensional cross-sectional images of the body region being examined. This data is displayed on a monitor. The physician reviews the data as it is being obtained and may request additional sections to provide more detail of areas of interest.

CT scan of face with contrast [CPT 70487]

Computerized tomography, also referred to as a CT scan, uses special x-ray equipment and computer technology to produce multiple cross-sectional images of the region being studied. In this study, CT scan of the maxillofacial area is obtained. The maxillofacial area includes the forehead (frontal bone), sinuses, nose and nasal bones, jaw (maxilla and mandible). The only facial region not included in this study is the orbit. The patient is positioned on the CT examination table. An initial pass is made through the CT scanner to determine the starting position of the scans, after which the CT scan is performed. As the table moves slowly through the scanner, numerous x-ray beams and electronic x-ray detectors rotate around the body region being examined. The amount of radiation being absorbed is measured. As the beams and detectors rotate around the body, the table is moved through the scanner. A computer program processes the data and renders the data in two-dimensional cross-sectional images of the body region being examined. This data is displayed on a monitor. The physician reviews the data as it is being obtained and may request additional sections to provide more detail of areas of interest.

CT scan of lower spine [CPT 72131]

Diagnostic computed tomography (CT) is done on the lumbar spine. CT uses multiple, narrow x-ray beams aimed around a single rotational axis, taking a series of 2D images of the target structure from multiple angles. Contrast material is used to enhance the images. Computer software processes the data and produces several images of thin, cross-sectional 2D slices of the targeted organ or area. Three-dimensional models of the spine can be created by stacking multiple, individual 2D slices together. The patient is placed inside the CT scanner on the table and images are obtained of the lumbar spine. The physician reviews the images to look for suspected problems with the spine such as bone disease, and evaluate for fractures or other injuries as well as birth defects of the spine in children.

CT scan of middle spine [CPT 72128]

Diagnostic computed tomography (CT) is done on the thoracic spine. CT uses multiple, narrow x-ray beams aimed around a single rotational axis, taking a series of 2D images of the target structure from multiple angles. Contrast material is used to enhance the images. Computer software processes the data and produces several images of thin, cross-sectional 2D slices of the targeted organ or area. Three-dimensional models of the spine can be created by stacking multiple, individual 2D slices together. The patient is placed inside the CT scanner on the table and images are obtained of the thoracic spine. The physician reviews the images to look for suspected problems with the spine such as bone disease, and evaluate for fractures or other injuries as well as birth defects of the spine in children.

CT scan of neck blood vessels with contrast [CPT 70498]

A computed tomographic angiography (CTA) of the neck is performed with contrast material including image postprocessing. Noncontrast images may also be obtained and are included when performed. CTA provides images of the blood vessels using a combination of computed tomography (CT) and angiography with contrast material. When angiography is performed using CT, multiple images are obtained and processed on a computer to create detailed, two-dimensional, cross-sectional views of the blood vessels. These images are then displayed on a computer monitor. The patient is positioned on the CT table. An intravenous line is inserted into a blood vessel, usually in the arm or hand. Non-contrast images may be obtained. A small dose of contrast is injected and test images are obtained to verify correct positioning. The CTA is then performed. Contrast is injected at a controlled rate and the CT table moves through the CT machine as the scanning is performed. After completion of the CTA, the radiologist reviews and interprets the CTA images of the neck.

CT scan of neck with contrast [CPT 70491]

Computerized tomography, also referred to as a CT scan, uses special x-ray equipment and computer technology to produce multiple cross-sectional images of the region being studied. In a CT scan of the soft tissues of the neck, the patient is positioned on the CT examination table. An initial pass is made through the CT scanner to determine the starting position of the scans, after which the CT scan is performed. As the table moves slowly through the scanner, numerous x-ray beams and electronic x-ray detectors rotate around the body region being examined. The amount of radiation being absorbed is measured. As the beams and detectors rotate around the body, the table is moved through the scanner. A computer program processes the data and renders the data in two-dimensional cross-sectional images of the body region being examined. This data is displayed on a monitor. The physician reviews the data as it is being obtained and may request additional sections to provide more detail of areas of interest.

CT scan of upper spine [CPT 72125]

Diagnostic computed tomography (CT) is done on the cervical spine. CT uses multiple, narrow x-ray beams aimed around a single rotational axis, taking a series of 2D images of the target structure from multiple angles. Contrast material is used to enhance the images. Computer software processes the data and produces several images of thin, cross-sectional 2D slices of the targeted organ or area. Three-dimensional models of the spine can be created by stacking multiple, individual 2D slices together. The patient is placed inside the CT scanner on the table and images are obtained of the cervical spine.

CT scan pelvis [CPT 72192]

Diagnostic computed tomography (CT) is done on the pelvis to provide detailed visualization of the organs and structures within or near the pelvis, such as kidneys, bladder, prostate, uterus, cervix, vagina, lymph nodes, and pelvic bones. CT uses multiple, narrow x-ray beams aimed around a single rotational axis, taking a series of 2D images of the target structure from multiple angles. Contrast material is used to enhance the images. Computer software processes the data and produces several images of thin, cross-sectional 2D slices of the targeted organ or area. Three-dimensional models of organs within the pelvis can be created by stacking multiple, individual 2D slices together. The patient is placed inside the CT scanner on the table and images are obtained of the pelvis area. The physician reviews the images to gather information for specified purposes such as diagnosing or monitoring cancer, evaluating the pelvic bones for fractures or other injury following trauma, locating abscesses or masses found during physical exam, finding the cause of pelvic pain, providing more detailed information before surgery, and evaluating the patient after surgery.

Complete X-ray study of abdomen with single X-ray of chest [CPT 74022]

A radiologic examination of the abdomen images the internal organs, soft tissue (muscle, fat), and supporting skeleton. X-ray imaging uses indirect ionizing radiation to take pictures of non-uniform material, such as human tissue, because of its different density and composition, which allows some of the x-rays to be absorbed and some to pass through and be captured. This produces a 2D image of the structures. The radiographs may be taken to look for size, shape, and position of organs, pattern of air (bowel gas), obstruction, foreign objects, and calcification in the gallbladder, urinary tract, and aorta. A radiologic examination of the abdomen may be ordered to diagnose abdominal distention and pain, vomiting, diarrhea or constipation, and traumatic injury; it may also be obtained as a screening exam or scout film prior to other imagining procedures.

Diagnostic CT scan of chest [CPT 71250]

Diagnostic computed tomography (CT) is done on the thorax. CT uses multiple, narrow x-ray beams aimed around a single rotational axis, taking a series of 2D images of the target structure from multiple angles. Contrast material is used to enhance the images. Computer software processes the data and reconstructs a 3D image. Thin, cross-sectional 2D and 3D slices are then produced of the targeted organ or area. The patient is placed inside the CT scanner on the table and images are obtained of the thorax to look for problems or disease in the lungs, heart, esophagus, soft tissue, or major blood vessels of the chest, such as the aorta. The physician reviews the images to look for suspected disease such as infection, lung cancer, pulmonary embolism, aneurysms, and metastatic cancer to the chest from other areas.

Diagnostic CT scan of chest with contrast [CPT 71260]

Diagnostic computed tomography (CT) is done on the thorax. CT uses multiple, narrow x-ray beams aimed around a single rotational axis, taking a series of 2D images of the target structure from multiple angles. Contrast material is used to enhance the images. Computer software processes the data and reconstructs a 3D image. Thin, cross-sectional 2D and 3D slices are then produced of the targeted organ or area. The patient is placed inside the CT scanner on the table and images are obtained of the thorax to look for problems or disease in the lungs, heart, esophagus, soft tissue, or major blood vessels of the chest, such as the aorta. The physician reviews the images to look for suspected disease such as infection, lung cancer, pulmonary embolism, aneurysms, and metastatic cancer to the chest from other areas.

Imaging guidance for procedure, up to 1 hour [CPT 76000]

Locm 300-399mg/ml iodine,1ml [HCPCS Q9967]

Low osmolar contrast material, 300-399 mg/ml iodine concentration, per ml

MRI scan brain [CPT 70551]

Magnetic resonance imaging is done on the brain. MRI is a noninvasive, non-radiating imaging technique that uses the magnetic properties of hydrogen atoms in the body. The patient is placed on a motorized table within a large MRI tunnel scanner that contains the magnet. The powerful magnetic field forces the hydrogen atoms to line up. Radiowaves are then transmitted within the strong magnetic field. Protons in the nuclei of different types of tissues emit a specific radiofrequency signal that bounces back to the computer, which processes the signals and converts the data into tomographic, 3D images with very high resolution. MRI of the brain provides reliable information for diagnosing the presence, location, and extent of tumors, cysts, or other masses; swelling and infection; vascular disorders or malformations, such as aneurysms and intracranial hemorrhage; disease of the pituitary gland; stroke; developmental and structural anomalies of the brain; hydrocephalus; and chronic conditions and diseases affecting the central nervous system such as headaches and multiple sclerosis.

MRI scan of middle spinal canal [CPT 72146]

Magnetic resonance imaging (MRI) is done on the thoracic spinal canal and contents. MRI is a noninvasive, non-radiating imaging technique that uses the magnetic properties of nuclei within hydrogen atoms of the body. The powerful magnetic field forces the hydrogen atoms to line up. Radiowaves are then transmitted within the strong magnetic field. Protons in the nuclei of different types of tissues emit a specific radiofrequency signal that bounces back to the computer, which records the images. The computer processes the signals and converts the data into tomographic, 3D, sectional images in slices with very high resolution. The patient is placed on a motorized table within a large MRI tunnel scanner that contains the magnet. MRI scans of the spine are often done when conservative treatment of back/neck pain is unsuccessful and more aggressive treatments are considered or following surgery.

MRI scan of upper spinal canal [CPT 72141]

Magnetic resonance imaging (MRI) is done on the cervical spinal canal and contents. MRI is a noninvasive, non-radiating imaging technique that uses the magnetic properties of nuclei within hydrogen atoms of the body. The powerful magnetic field forces the hydrogen atoms to line up. Radiowaves are then transmitted within the strong magnetic field. Protons in the nuclei of different types of tissues emit a specific radiofrequency signal that bounces back to the computer, which records the images. The computer processes the signals and converts the data into tomographic, 3D, sectional images in slices with very high resolution. The patient is placed on a motorized table within a large MRI tunnel scanner that contains the magnet. MRI scans of the spine are often done when conservative treatment of back/neck pain is unsuccessful and more aggressive treatments are considered or following surgery.

Nuclear medicine study of vessels of heart using drugs or exercise multiple studies [CPT 78452]

Myocardial perfusion imaging is a nuclear medicine procedure used to evaluate the heart muscle and blood flow to the heart. An intravenous line is inserted into a vein in the hand or arm. ECG leads are placed and a blood pressure cuff is placed on the arm. The patient lies flat on a table in the procedure room for myocardial perfusion imaging performed at rest. For a stress study, the patient is either on a treadmill or bike or an injection of a pharmacologic agent is administered to stress the heart. A radionuclide, also called a tracer, is injected into the intravenous line and allowed to circulate. The radionuclide localizes in healthy heart tissue. Ischemic heart tissue does not absorb the radionuclide. Images of the heart and great vessels are obtained using single photon emission computed tomography (SPECT). When SPECT images are obtained, the scanner rotates around the body to obtain images in multiple planes. The physician evaluates heart wall motion to determine how effective the heart muscle is in pumping blood through the heart and to the peripheral vascular system. Ejection fraction, which is the percentage of blood pumped out of the heart to the peripheral vascular system, is measured using either a first pass or gated technique. In a first pass technique, images are obtained as the blood circulates through the heart during the first pass of the radionuclide. In a gated technique, a series of images are obtained between heart beats. Using electrical signals from the heart, the camera captures a series of images as the heart rests, creating very sharp, high resolution images. Additional images are obtained as needed. The physician reviews the images, calculates the ejection fraction and quantifies other parameters of heart function based on the distribution of the radionuclide. The physician then provides a written report of findings.

Ultrasonic guidance imaging supervision and interpretation for insertion of needle [CPT 76942]

Ultrasound guidance including imaging supervision and interpretation is performed for needle placement during a separately reportable biopsy, aspiration, injection, or placement of a localization device. A local anesthetic is injected at the site of the planned needle or localization device placement. A transducer is then used to locate the lesion, site of the planned injection, or site of the planned placement of the localization device. The radiologist constantly monitors needle placement with the ultrasound probe to ensure the needle is properly placed. The radiologist also uses ultrasound imaging to monitor separately reportable biopsy, aspiration, injection, or device localization procedures. Upon completion of the procedure, the needle is withdrawn and pressure applied to control bleeding. A dressing is applied as needed. The radiologist then provides a written report of the ultrasound imaging component of the procedure.

Ultrasound behind abdominal cavity [CPT 76770]

A real time retroperitoneal ultrasound is performed with image documentation. The patient is placed supine. Acoustic coupling gel is applied to the skin of the abdomen. The transducer is pressed firmly against the skin and swept back and forth over the abdomen and images obtained of the retroperitoneal area. The ultrasonic wave pulses directed at the retroperitoneum are imaged by recording the ultrasound echoes. Any abnormalities are evaluated to identify characteristics that might provide a definitive diagnosis. The physician reviews the ultrasound images of the retroperitoneum and provides a written interpretation.

Ultrasound behind abdominal cavity, limited [CPT 76775]

A real time retroperitoneal ultrasound is performed with image documentation. The patient is placed supine. Acoustic coupling gel is applied to the skin of the abdomen. The transducer is pressed firmly against the skin and swept back and forth over the abdomen and images obtained of the retroperitoneal area. The ultrasonic wave pulses directed at the retroperitoneum are imaged by recording the ultrasound echoes. Any abnormalities are evaluated to identify characteristics that might provide a definitive diagnosis. The physician reviews the ultrasound images of the retroperitoneum and provides a written interpretation.

Ultrasound examination of heart including color-depicted blood flow rate, direction, and valve function [CPT 93306]

The physician performs complete transthoracic real-time echocardiography with image documentation (2-D) including M-mode recording, if performed, with spectral Doppler and color flow Doppler echocardiography. Cardiac structure and dynamics are evaluated using a series of real-time tomographic images with multiple views recorded digitally or on videotape. Time-motion (M-mode) recordings are made as needed to allow dimensional measurement. Blood flow and velocity patterns within the heart, across valves and within the great vessels are evaluated by color flow Doppler. Normal blood flow patterns through these regions have a characteristic pattern defined by direction, velocity, duration, and timing throughout the cardiac cycle. Spectral Doppler by pulsed or continuous wave technique is used to evaluate antegrade flow through inflow and outflow tracts and cardiac valves. Multiple transducer positions or orientations may be required. The physician reviews the echocardiography images and orders additional images as needed to allow evaluation of any abnormalities. Digital or videotaped images are then reviewed by the physician. Abnormalities of cardiac structure or dynamics are noted. The extent of the abnormalities is evaluated and quantified. Any previous cardiac studies are compared to the current study and any quantitative or qualitative changes are identified. The physician provides an interpretation of the echocardiography with a written report of findings.

Ultrasound of abdomen, limited [CPT 76705]

A real time abdominal ultrasound is performed with image documentation. The patient is placed supine. Acoustic coupling gel is applied to the skin of the abdomen. The transducer is pressed firmly against the skin and swept back and forth over the abdomen and images obtained. The ultrasonic wave pulses directed at the abdomen are imaged by recording the ultrasound echoes. Any abnormalities are evaluated to identify characteristics that might provide a definitive diagnosis. The physician reviews the ultrasound images of the abdomen and provides a written interpretation.

Ultrasound of head and neck [CPT 76536]

An ultrasound examination of soft tissues of the head and neck is performed with image documentation. The thyroid, parathyroid, or parotid glands and surrounding soft tissue may be examined. Ultrasound visualizes the body internally using sound waves far above human perception bounce off interior anatomical structures. As the sound waves pass through different densities of tissue, they are reflected back to the receiving unit at varying speeds and converted into pictures displayed on screen. A linear scanner or mechanical sector scanner is used to evaluate the shape, size, border, internal architecture, distal enhancement, color flow, and echogenicity of the soft tissue structures of the head and neck as well as any lesions or masses. The echogenicity is compared to that of the surrounding muscle tissue. The physician reviews the images and provides a written interpretation.

Ultrasound of one breast, limited [CPT 76642]

A real time ultrasound of the right or left breast is performed with image documentation, including the axillary area, when performed. Breast ultrasound is used to help diagnose breast abnormalities detected during a physical exam or on mammography. Ultrasound imaging can identify masses as solid or fluid-filled and can show additional structural features of the abnormal area and surrounding tissues. The patient is placed supine with the arm raised above the head on the side being examined. Acoustic coupling gel is applied to the breast and the transducer is pressed firmly against the skin of the breast. The transducer is then swept back and forth over the area of the abnormality and images are obtained. The ultrasonic wave pulses directed at the breast are imaged by recording the ultrasound echoes. Any abnormalities are evaluated to identify characteristics that might provide a definitive diagnosis. The physician reviews the ultrasound images of the breast and provides a written interpretation.

Ultrasound of pelvis, complete, not pregnancy related [CPT 76856]

A real time pelvic (non-obstetric) ultrasound is performed with image documentation to evaluate the uterus and cervix, ovaries, fallopian tubes, and bladder. Conditions evaluated include pelvic pain, abnormal bleeding, and palpable masses, such as ovarian cysts, uterine fibroids, or other pelvic masses. The patient presents with a full bladder. Acoustic coupling gel is applied to the skin of the lower abdomen. The transducer is pressed firmly against the skin and swept back and forth over the lower abdomen and images obtained of the uterus, ovaries, and surrounding pelvic structures. The ultrasonic wave pulses directed at the pelvic structures are imaged by recording the ultrasound echoes. Any abnormalities are evaluated. The physician reviews the ultrasound images and provides a written interpretation.

Ultrasound of pelvis, limited, not pregnancy related [CPT 76857]

Ultrasound of scrotum [CPT 76870]

An ultrasound examination of the scrotum and its contents is a non-invasive procedure that uses a transducer probe placed firmly against the skin to deliver high frequency sound waves and create a gray scale and/or color (Doppler) image of the internal anatomy. Ultrasound may be used to detect scrotal masses/tumors and undescended testicle(s), as well as to evaluate testicular torsion, scrotal injury or trauma, hydrocele(s), varicocele(s), and male infertility. Ultrasonic conduction gel is applied to the scrotum and the transducer probe is held against the skin and swept over the area. The images produced are captured on a screen and viewed in real-time and/or saved for later analysis.

Ultrasound scan of abdominal, pelvic, and/or scrotal arterial inflow and venous outflow [CPT 93975]

Ultrasound scan of veins of both arms or legs including assessment of compression and functional maneuvers [CPT 93970]

A vascular ultrasound study is performed to evaluate veins in the extremities. A duplex scan uses both B-mode and Doppler studies. A clear gel is placed on the skin of the extremity over the region to be studied. A B-mode transducer is placed on the skin and real-time images of the veins are obtained. A Doppler probe within the B-mode transducer provides information on the pattern and direction of blood flow in the veins. The B-mode transducer produces ultrasonic sound waves that move through the skin and bounce off the veins when the probe is moved over the region being studied. The Doppler probe produces sound waves that bounce off blood cells moving within the veins. The reflected sound waves are sent to an amplifier that makes the sound waves audible. The pitch of the sound waves changes if there is reduced blood flow, or ceases altogether if a vessel is completely obstructed. A computer converts the sound waves to images that are overlaid with colors to produce video images showing the speed and direction of blood flow as well as any obstruction. Spectral Doppler analysis is performed to provide information on anatomy and hemodynamic function. The duplex scan may include a baseline evaluation followed by additional scans obtained with compression or using other maneuvers that alter blood flow. The physician reviews the duplex scan and provides a written interpretation of findings.

Ultrasound scanning of blood flow (outside the brain) on both sides of head and neck [CPT 93880]

A vascular ultrasound study is performed to evaluate the extracranial arteries which include the common carotid and external carotid arteries. A duplex scan uses both B-mode and Doppler studies. A clear gel is placed on the skin over the arteries to be studied. A B-mode transducer is placed on the skin and real-time images of the artery are obtained. A Doppler probe within the B-mode transducer provides information on pattern and direction of blood flow in the artery. The B-mode transducer produces ultrasonic sound waves that move through the skin and bounce off the arteries when the probe is placed over the arteries at various locations and angles. The Doppler probe produces sound waves that bounce off blood cells moving within the artery. The reflected sound waves are sent to an amplifier that makes the sound waves audible. The pitch of the sound waves changes if there is reduced blood flow, or ceases altogether if a vessel is completely obstructed. A computer converts the sound waves to images that are overlaid with colors to produce video images showing the speed and direction of blood flow as well as any obstruction. Spectral Doppler analysis is performed to provide information on anatomy and hemodynamic function, including information on the presence of narrowing and plaque formation within the arteries. The physician reviews the duplex scan and provides a written interpretation of findings.

Ultrasound study of arteries of both arms and legs, limited [CPT 93922]

X-ray of abdomen, 1 view [CPT 74018]

A radiologic examination of the abdomen images the internal organs, soft tissue (muscle, fat), and supporting skeleton. X-ray imaging uses indirect ionizing radiation to take pictures of non-uniform material, such as human tissue, because of its different density and composition, which allows some of the x-rays to be absorbed and some to pass through and be captured. This produces a 2D image of the structures. The radiographs may be taken to look for size, shape, and position of organs, pattern of air (bowel gas), obstruction, foreign objects, and calcification in the gallbladder, urinary tract, and aorta. A radiologic examination of the abdomen may be ordered to diagnose abdominal distention and pain, vomiting, diarrhea or constipation, and traumatic injury; it may also be obtained as a screening exam or scout film prior to other imagining procedures. Common views of the abdomen include front to back anteroposterior (AP) with the patient lying supine or standing erect, back to front posteroanterior (PA) with the patient lying prone, lateral with the patient lying on the side, lateral decubitus anteroposterior (side lying, front to back view), lateral dorsal decubitus (lying supine, side view), oblique (anterior or posterior rotation), and coned (small collimated) views which may be used to localize and differentiate lesions, calcifications, or herniations.

X-ray of abdomen, 2 views [CPT 74019]

A radiologic examination of the abdomen images the internal organs, soft tissue (muscle, fat), and supporting skeleton. X-ray imaging uses indirect ionizing radiation to take pictures of non-uniform material, such as human tissue, because of its different density and composition, which allows some of the x-rays to be absorbed and some to pass through and be captured. This produces a 2D image of the structures. The radiographs may be taken to look for size, shape, and position of organs, pattern of air (bowel gas), obstruction, foreign objects, and calcification in the gallbladder, urinary tract, and aorta. A radiologic examination of the abdomen may be ordered to diagnose abdominal distention and pain, vomiting, diarrhea or constipation, and traumatic injury; it may also be obtained as a screening exam or scout film prior to other imagining procedures. Common views of the abdomen include front to back anteroposterior (AP) with the patient lying supine or standing erect, back to front posteroanterior (PA) with the patient lying prone, lateral with the patient lying on the side, lateral decubitus anteroposterior (side lying, front to back view), lateral dorsal decubitus (lying supine, side view), oblique (anterior or posterior rotation), and coned (small collimated) views which may be used to localize and differentiate lesions, calcifications, or herniations.

X-ray of ankle, minimum of 3 views [CPT 73610]

A radiologic examination of the ankle images the bones of the distal lower extremities including the tibia, fibula, and talus. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for the cause of pain, limping, or swelling, or conditions such as fractures, dislocations, deformities, degenerative disease, osteomyelitis, arthritis, foreign body, and cysts or tumors. Ankle x-rays may also be used to determine whether there is satisfactory alignment of lower extremity bones following fracture treatment. Standard views of the ankle include front to back anteroposterior (AP), lateral (side), oblique (semi-prone position with body and leg partially rotated), and stress study with traction placed on the joint manually.

X-ray of both hips with pelvis, 2 views [CPT 73521]

A radiologic examination is done on both the left and the right hip, which may also include the pelvis. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for conditions such as fractures, dislocations, deformities, degenerative bone conditions, osteomyelitis, arthritis, foreign body, infection, or tumor. Hip standard views that are taken most frequently include the front to back anteroposterior view taken with the patient lying supine and the legs straight, rotated slightly inward; the lateral ‘frog-leg’ view, taken with the hips flexed and abducted and the knees flexed with the soles of the feet placed together; a cross table view with the unaffected hip and knee flexed at a 90 degree angle out of the way and the beam aimed perpendicular to the long axis of the femur on the affected side. Another type of lateral view is taken with the hip flexed 45 degrees and abducted 45 degrees and the beam aimed perpendicular to the table. A front to back view of the hips in a pelvic view is often taken with the patient supine and both legs rotated slightly inward about 15 degrees.

X-ray of chest, 1 view [CPT 71045]

A radiologic examination of the chest is performed. Chest radiographs (X-rays) provide images of the heart, lungs, bronchi, major blood vessels (aorta, vena cava, pulmonary vessels), and bones, (sternum, ribs, clavicle, scapula, spine). The most common views are frontal (also referred to as anteroposterior or AP), posteroanterior (PA), and lateral. To obtain a frontal view, the patient is positioned facing the x-ray machine. A PA view is obtained with the patient's back toward the x-ray machine. For a lateral view, the patient is positioned with side of the chest toward the machine. Other views that may be obtained include apical lordotic, oblique, and lateral decubitus. An apical lordotic image provides better visualization of the apical (top) regions of the lungs. The patient is positioned with the back arched so that the tops of the lungs can be x-rayed. Oblique views may be obtained to evaluate a pulmonary or mediastinal mass or opacity or to provide additional images of the heart and great vessels. There are four positions used for oblique views including right and left anterior oblique, and right and left posterior oblique. Anterior oblique views are obtained with the patient standing and the chest rotated 45 degrees. The arm closest to the x-ray cassette is flexed with the hand resting on the hip. The opposite arm is raised as high as possible. The part of the chest farthest away from the x-ray cassette is the area being studied. Posterior oblique views are typically obtained only when the patient is too ill to stand or lay prone for anterior oblique views. A lateral decubitus view is obtained with the patient lying on the side; the patient's head rests on one arm, and the other arm is raised over the head with the elbow bent. Images are recorded on hard copy film or stored electronically as digital images. The physician reviews the images, notes any abnormalities, and provides a written interpretation of the findings.

X-ray of chest, 2 views [CPT 71046]

A radiologic examination of the chest is performed. Chest radiographs (X-rays) provide images of the heart, lungs, bronchi, major blood vessels (aorta, vena cava, pulmonary vessels), and bones, (sternum, ribs, clavicle, scapula, spine). The most common views are frontal (also referred to as anteroposterior or AP), posteroanterior (PA), and lateral. To obtain a frontal view, the patient is positioned facing the x-ray machine. A PA view is obtained with the patient's back toward the x-ray machine. For a lateral view, the patient is positioned with side of the chest toward the machine. Other views that may be obtained include apical lordotic, oblique, and lateral decubitus. An apical lordotic image provides better visualization of the apical (top) regions of the lungs. The patient is positioned with the back arched so that the tops of the lungs can be x-rayed. Oblique views may be obtained to evaluate a pulmonary or mediastinal mass or opacity or to provide additional images of the heart and great vessels. There are four positions used for oblique views including right and left anterior oblique, and right and left posterior oblique. Anterior oblique views are obtained with the patient standing and the chest rotated 45 degrees. The arm closest to the x-ray cassette is flexed with the hand resting on the hip. The opposite arm is raised as high as possible. The part of the chest farthest away from the x-ray cassette is the area being studied. Posterior oblique views are typically obtained only when the patient is too ill to stand or lay prone for anterior oblique views. A lateral decubitus view is obtained with the patient lying on the side; the patient's head rests on one arm, and the other arm is raised over the head with the elbow bent. Images are recorded on hard copy film or stored electronically as digital images. The physician reviews the images, notes any abnormalities, and provides a written interpretation of the findings.

X-ray of chest, minimum of 4 views [CPT 71048]

X-ray of collar bone [CPT 73000]

A complete radiologic examination of the clavicle is performed to determine fractures or dislocations. The most common type of fracture involves the middle third of the clavicle, followed by the lateral third distal to the coracoclavicular ligament. The least common type of clavicular fracture involves the proximal third. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. Radiographs are taken according to the suspected location of the injury. Standard evaluation includes an anteroposterior view focused on the midshaft wide enough to assess the acromioclavicular and sternoclavicular joints. Oblique views are also obtained with a cephalic tilt of 20-60 degrees.

X-ray of elbow, minimum of 3 views [CPT 73080]

A radiologic examination of the elbow is done. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. X-rays of the elbow are usually considered necessary to assess for fractures or dislocations when the normal range of motion for extension, flexion, supination, and pronation cannot be carried out. Most acute disruptions of the elbow joint can be diagnosed by conventional x-ray examination, with the minimum number of views including the front to back anteroposterior projection with the elbow in as full extension as possible, and the side, or lateral image taken in flexion. A complete series of images also includes an oblique view of the radial head-capitellar image to help diagnose suspected subtle fractures involving the radial head or in cases of acute pain and trauma. The patient needs to be able to hold the elbow in full extension for the front view and in 90 degree flexion for the oblique and lateral views as much as possible.

X-ray of femur, minimum 2 views [CPT 73552]

A radiologic examination of the femur is done between the hip and the knee. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for the cause of pain, limping, or swelling, conditions such as fractures, dislocations, deformities, degenerative bone conditions, osteomyelitis, arthritis, foreign body, and cysts or tumors. X-rays may also be used to determine whether the femur is in satisfactory alignment following fracture treatment. Femur standard views that are taken most frequently include the front to back anteroposterior view and the lateral view from the side.

X-ray of fingers, minimum of 2 views [CPT 73140]

A radiologic examination of the finger(s) is done with at least 2 different projections taken. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for conditions such as fractures, interphalangeal (IP) joint dislocations, deformities, degenerative bone conditions, osteomyelitis, arthritis, foreign body, or tumors. The posteroanterior projection is taken with the palm down flat, fingers extended, and slightly apart to show the metacarpals, phalanges, and IP joints of the target finger(s). Anteroposterior views are taken with the back of the hand placed on the film and the x-ray beam going from palmar to dorsal direction. Lateral views are taken with the ulnar side of the hand on the film cassette and the fingers spread apart to avoid overlap, sometimes supported from underneath. Oblique views can be obtained with the hand placed palm down and the radial side rotated 45 degrees up away from the surface, with the fingers extended and spread apart.

X-ray of foot, 2 views [CPT 73620]

A radiologic examination of the foot images the bones of the distal lower extremity and may include the tibia, fibula, talus, calcaneus, cuboid, navicular, cuneiform, metatarsals, and phalanges. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for the cause of pain, limping, or swelling, or conditions such as fractures, dislocations, deformities, degenerative disease, osteomyelitis, arthritis, foreign body, and cysts or tumors. Foot x-rays may also be used to determine whether there is satisfactory alignment of foot bones following fracture treatment. Standard views of the foot include top to bottom dorsal planter (DP), lateral (side), oblique (semi-prone position with body and leg partially rotated), and stress study with traction placed on the joint manually.

X-ray of foot, minimum of 3 views [CPT 73630]

A radiologic examination of the foot images the bones of the distal lower extremity and may include the tibia, fibula, talus, calcaneus, cuboid, navicular, cuneiform, metatarsals, and phalanges. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for the cause of pain, limping, or swelling, or conditions such as fractures, dislocations, deformities, degenerative disease, osteomyelitis, arthritis, foreign body, and cysts or tumors. Foot x-rays may also be used to determine whether there is satisfactory alignment of foot bones following fracture treatment. Standard views of the foot include top to bottom dorsal planter (DP), lateral (side), oblique (semi-prone position with body and leg partially rotated), and stress study with traction placed on the joint manually.

X-ray of forearm, 2 views [CPT 73090]

A radiologic examination of the forearm is done. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. Frontal views, or back to front (PA) views and lateral views are necessary to show the radius and ulna and assess the extent and direction of injury. Since the radius and ulna are anatomically connected at both ends of the bones with ligaments, the two bones function in a manner that makes the forearm considered as a single unit when assessing injury. The two standard views taken for x-ray examination of the forearm include the anteroposterior (AP) view, and the lateral view.

X-ray of hand, 2 views [CPT 73120]

A radiologic examination of the hand is done. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for conditions such as fractures, dislocations, deformities, degenerative bone conditions, osteomyelitis, arthritis, foreign body, or tumors. Hand x-rays are also used to help determine the 'bone age' of children and assess whether any nutritional or metabolic disorders may be interfering with proper development. The posteroanterior projection is taken with the palm down flat and may show not only the metacarpals, phalanges, and interphalangeal joints, but the carpal bones, radius, and ulna as well. Lateral views may be taken with the hand placed upright, resting upon the ulnar side of the palm and little finger with the thumb on top, ideally with the fingers supported by a sponge and splayed to avoid overlap. Oblique views can be obtained with the hand placed palm down and rolled slightly to the outside with the fingertips still touching the film surface. The beam is angled perpendicular to the cassette for oblique projections and aimed at the middle finger metacarpophalangeal joint.

X-ray of hand, minimum of 3 views [CPT 73130]

A radiologic examination of the hand is done. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for conditions such as fractures, dislocations, deformities, degenerative bone conditions, osteomyelitis, arthritis, foreign body, or tumors. Hand x-rays are also used to help determine the 'bone age' of children and assess whether any nutritional or metabolic disorders may be interfering with proper development. The posteroanterior projection is taken with the palm down flat and may show not only the metacarpals, phalanges, and interphalangeal joints, but the carpal bones, radius, and ulna as well. Lateral views may be taken with the hand placed upright, resting upon the ulnar side of the palm and little finger with the thumb on top, ideally with the fingers supported by a sponge and splayed to avoid overlap. Oblique views can be obtained with the hand placed palm down and rolled slightly to the outside with the fingertips still touching the film surface. The beam is angled perpendicular to the cassette for oblique projections and aimed at the middle finger metacarpophalangeal joint.

X-ray of heel, minimum of 2 views [CPT 73650]

A radiologic examination of the calcaneus images the bones of the distal lower extremity and usually includes the tibia, fibula, and talus. A radiologic examination of the toe(s) (phalanges) will usually include the metatarsals. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for the cause of pain, limping, or swelling, or conditions such as fractures, dislocations, deformities, degenerative disease, osteomyelitis, arthritis, foreign body, and cysts or tumors. Calcaneus and toe(s) x-rays may also be used to determine whether there is satisfactory alignment of lower extremity bones following fracture treatment. Standard views to image the calcaneus include lateral (side) and axial (supine with foot dorsiflexed). Common views to image the toe(s) include top to bottom dorsal planter (DP) and oblique (supine with leg rotated medially to image the 1st, 2nd, and 3rd digits and laterally to image the 4th and 5th digits).

X-ray of hip with pelvis, 2-3 views [CPT 73502]

A radiologic examination of the hip is done on either the left or the right side, which may also include the pelvis. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for conditions such as fractures, dislocations, deformities, degenerative bone conditions, osteomyelitis, arthritis, foreign body, infection, or tumor. Hip standard views that are taken most frequently include the front to back anteroposterior view taken with the patient lying supine and the legs straight, rotated slightly inward; the lateral ‘frog-leg’ view, taken with the hips flexed and abducted and the knees flexed with the soles of the feet placed together; a cross table view with the unaffected hip and knee flexed at a 90 degree angle out of the way and the beam aimed perpendicular to the long axis of the femur on the affected side. Another type of lateral view is taken with the hip flexed 45 degrees and abducted 45 degrees and the beam aimed perpendicular to the table.

X-ray of knee, 1 or 2 views [CPT 73560]

A radiologic examination of the knee images the femur, tibia, fibula, patella, and soft tissue. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for the cause of pain, limping, or swelling, or conditions such as fractures, dislocations, deformities, degenerative disease, osteomyelitis, arthritis, foreign body, and cysts or tumors. Knee x-rays may also be used to determine whether there is satisfactory alignment of lower extremity bones following fracture treatment. Standard views of the knee include front to back anteroposterior (AP), lateral (side), and back to front posteroanterior (PA) with variations in the flexion of the joint, and weight bearing and non-weight bearing postures.

X-ray of knee, 3 views [CPT 73562]

A radiologic examination of the knee images the femur, tibia, fibula, patella, and soft tissue. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for the cause of pain, limping, or swelling, or conditions such as fractures, dislocations, deformities, degenerative disease, osteomyelitis, arthritis, foreign body, and cysts or tumors. Knee x-rays may also be used to determine whether there is satisfactory alignment of lower extremity bones following fracture treatment. Standard views of the knee include front to back anteroposterior (AP), lateral (side), and back to front posteroanterior (PA) with variations in the flexion of the joint, and weight bearing and non-weight bearing postures.

X-ray of knee, 4 or more views [CPT 73564]

A radiologic examination of the knee images the femur, tibia, fibula, patella, and soft tissue. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for the cause of pain, limping, or swelling, or conditions such as fractures, dislocations, deformities, degenerative disease, osteomyelitis, arthritis, foreign body, and cysts or tumors. Knee x-rays may also be used to determine whether there is satisfactory alignment of lower extremity bones following fracture treatment. Standard views of the knee include front to back anteroposterior (AP), lateral (side), and back to front posteroanterior (PA) with variations in the flexion of the joint, and weight bearing and non-weight bearing postures.

X-ray of lower and sacral spine, 2 or 3 views [CPT 72100]

A radiologic exam is done of the lumbosacral spine. Frontal, posteroanterior, and lateral views are the most common projections taken. X-ray uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures.

X-ray of lower leg, 2 views [CPT 73590]

A radiologic examination of the tibia and fibula images the bones of the distal lower extremities and may include the knee and ankle joints. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for the cause of pain, limping, or swelling, or conditions such as fractures, dislocations, deformities, degenerative disease, osteomyelitis, arthritis, foreign body, and cysts or tumors. Tibia and fibula x-rays may also be used to determine whether there is satisfactory alignment of lower extremity bones following fracture treatment. Standard views of the tibia and fibula include front to back anteroposterior (AP) and lateral (side).

X-ray of middle and lower spine, 2 views [CPT 72080]

X-ray of middle spine, 2 views [CPT 72070]

A radiologic exam is done of the thoracic spine. X-ray uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. X-rays are taken of the thoracic spine to evaluate for back pain or suspected disease or injury. Films are taken from differing views that commonly include anteroposterior, lateral, posteroanterior, and a swimmer's view for the upper thoracic spine in which the patient reaches up with one arm and down with the other as if taking a swimming stroke.

X-ray of middle spine, 3 views [CPT 72072]

A radiologic exam is done of the thoracic spine. X-ray uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. X-rays are taken of the thoracic spine to evaluate for back pain or suspected disease or injury. Films are taken from differing views that commonly include anteroposterior, lateral, posteroanterior, and a swimmer's view for the upper thoracic spine in which the patient reaches up with one arm and down with the other as if taking a swimming stroke.

X-ray of pelvis, 1 or 2 views [CPT 72170]

A diagnostic x-ray examination of the pelvis is done. X-ray uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. Bones appear white while soft tissue and fluids appear shades of grey. Pelvic x-rays are taken when the patient complains of pain and/or injury in the area of the pelvis or hip joints to assess for fractures and detect arthritis or bone disease. The patient is placed on a table and different views of the pelvis are taken by having the patient position the legs and feet differently, such as turning the feet inward to point at each other, or bending the knees outward with the soles of the feet together in a 'frog-leg' position.

X-ray of pelvis, minimum of 2 views [CPT 72220]

A radiologic examination of the sacrum and coccyx is done with at least 2 views obtained. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. Routine views include an anteroposterior (AP) or posteroanterior (PA) view of the sacrum, an AP or PA view of the coccyx, and lateral sacrum/coccyx views. For the sacral view, the patient's pelvis needs to be positioned correctly so the sacrum and sacroiliac joints are symmetrical. Because the coccyx has a forward curvature in relation to the sacrum, it is not automatically visualized when taking an AP view of the sacrum, and so another positioning is done for the coccyx. For lateral views, the patient stands sideways with feet shoulder width apart and arms crossed at the shoulders. Lateral imaging shows the entire 5th lumbar vertebra, the sacrum, and the coccyx. Good sacrum and coccyx imaging requires patient preparation with an empty bladder, clean colon, and removal of clothing in favor of wearing a gown. This is due to the difficulty these obstructions can cause in achieving a good radiographic image. Shielding is done for males, but is not possible for female patients.

X-ray of ribs of one side of body, 2 views [CPT 71100]

Rib radiographs (x-rays) are typically obtained following trauma to the rib cage to determine if fractures or other internal injuries are present. The most common views of the ribs are anteroposterior (AP) (frontal) and oblique. There are four positions used for oblique views: right anterior oblique, left anterior oblique, right posterior oblique, and left posterior oblique. Anterior oblique views are obtained with the patient standing and the chest rotated 45 degrees. The arm closest to the x-ray cassette is flexed with the hand resting on the hip. The opposite arm is raised as high as possible. The part of the chest farthest away from the x-ray cassette is the area that is being studied. Posterior oblique views are typically obtained only when the patient is too ill to stand or lay prone for anterior oblique views.

X-ray of ribs on one side of body including the chest, minimum of 3 views [CPT 71101]

Rib radiographs (x-rays) are typically obtained following trauma to the rib cage to determine if fractures or other internal injuries are present. The most common views of the ribs are anteroposterior (AP) (frontal) and oblique. There are four positions used for oblique views: right anterior oblique, left anterior oblique, right posterior oblique, and left posterior oblique. Anterior oblique views are obtained with the patient standing and the chest rotated 45 degrees. The arm closest to the x-ray cassette is flexed with the hand resting on the hip. The opposite arm is raised as high as possible. The part of the chest farthest away from the x-ray cassette is the area that is being studied. Posterior oblique views are typically obtained only when the patient is too ill to stand or lay prone for anterior oblique views.

X-ray of shoulder, minimum of 2 views [CPT 73030]

A radiologic examination of the shoulder is done. The shoulder is the junction of the humeral head and the glenoid of the scapula. Standard views include the anteroposterior (AP) view and the lateral 'Y' view, named because of the Y shape formed by the scapula when looking at it from the side. An axial view can also be obtained for further assessment when the patient is able to hold the arm in abduction. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures.

X-ray of spine of neck, 2 or 3 views [CPT 72040]

A radiologic exam is done of the cervical spine. Anteroposterior and lateral views are the most common projections taken. X-ray uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures.

X-ray of toes, minimum of 2 views [CPT 73660]

A radiologic examination of the calcaneus images the bones of the distal lower extremity and usually includes the tibia, fibula, and talus. A radiologic examination of the toe(s) (phalanges) will usually include the metatarsals. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for the cause of pain, limping, or swelling, or conditions such as fractures, dislocations, deformities, degenerative disease, osteomyelitis, arthritis, foreign body, and cysts or tumors. Calcaneus and toe(s) x-rays may also be used to determine whether there is satisfactory alignment of lower extremity bones following fracture treatment. Standard views to image the calcaneus include lateral (side) and axial (supine with foot dorsiflexed). Common views to image the toe(s) include top to bottom dorsal planter (DP) and oblique (supine with leg rotated medially to image the 1st, 2nd, and 3rd digits and laterally to image the 4th and 5th digits).

X-ray of upper arm, minimum of 2 views [CPT 73060]

A radiologic examination of the humerus is done with a minimum of 2 views taken. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The surgical neck of the humerus is the most common site of fracture. Shaft fractures are often associated with some kind of pathological lesion. X-rays of the humerus can be taken to detect deformities or lesions in the upper arm, such as cysts, tumors, late stage infection, or other diseases as well as a broken bone. The standard views of the humerus include the front to back anteroposterior view and the side, or lateral view.

X-ray of wrist, 2 views [CPT 73100]

A radiologic examination of the wrist is done. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for conditions such as fractures, dislocations, deformities, arthritis, foreign body, infection, or tumor. Wrist standard views include the front to back anteroposterior (AP) or back to front posteroanterior (PA) projection; the lateral view with the elbow flexed and the hand and wrist placed thumb up; and oblique views. Oblique views are obtained with the hand and wrist either supinated or pronated with the hand slightly flexed so the carpal target area lies flat, and then rotating the wrist 45 degrees externally or internally. A more specialized image may be obtained for assessing carpal tunnel. For the carpal tunnel view, the forearm is pronated with the palm down, and the wrist is hyperextended as far as possible by grasping the fingers with the opposite hand and gently hyperextending the joint until the metacarpals and fingers are in a near vertical position.

X-ray of wrist, minimum of 3 views [CPT 73110]

A radiologic examination of the wrist is done. X-ray imaging uses indirect ionizing radiation to take pictures inside the body. X-rays work on non-uniform material, such as human tissue, because of the different density and composition of the object, which allows some of the x-rays to be absorbed and some to pass through and be captured behind the object on a detector. This produces a 2D image of the structures. The radiographs may be taken to look for conditions such as fractures, dislocations, deformities, arthritis, foreign body, infection, or tumor. Wrist standard views include the front to back anteroposterior (AP) or back to front posteroanterior (PA) projection; the lateral view with the elbow flexed and the hand and wrist placed thumb up; and oblique views. Oblique views are obtained with the hand and wrist either supinated or pronated with the hand slightly flexed so the carpal target area lies flat, and then rotating the wrist 45 degrees externally or internally. A more specialized image may be obtained for assessing carpal tunnel. For the carpal tunnel view, the forearm is pronated with the palm down, and the wrist is hyperextended as far as possible by grasping the fingers with the opposite hand and gently hyperextending the joint until the metacarpals and fingers are in a near vertical position.